Grandstream Networks 200 Series user manual Restore Factory Default Setting, Step

Page 46

7 Restore Factory Default Setting

Warning !!!

Restore the Factory Default Setting will DELETE all configuration information of the device. Please backup or print out all the settings before you approach to following steps. Grandstream will not take any responsibility if you lose all the parameters of setting and cannot connect to your service provider.

Step 1:

Find the MAC Address of the device. The MAC address of the device is located on the bottom of the device. It is a 12-digit number. User can also use Menu option 10 to find out the phone’s MAC address.

Step 2:

Encode the MAC address. Please use the following mapping:

0-9: 0-9

A:22

B:222

C:2222

D:33

E:333

F:3333

For example, if the MAC address is 000b8200e395, it should be encoded as “0002228200333395”.

Step 3:

Access the phone screen menu, select “-- reset --" with the up or down arrows keys.

Step 4:

Enter the encoded MAC address. Once the correct MAC address is displayed in the LCD screen, press “MENU” button, the device will reboot automatically and restore to factory default setting.

46

Image 46

Contents Grandstream Networks, Inc For Firmware VersionTable of Contents Using BUDGETONE-200 IP PhoneRestore Factory Default Setting Appendix I Glossary of Terms Welcome What is Included in the Package InstallationConnecting Your Phone Safety Compliances WarrantyPage Product Overview Key Features Software FeaturesHardware Features Hardware Specification Model BudgeTone-200Getting Familiar with LCD / LED Using BudgeTone-200 IP PhoneIcon LCD Icon Definitions Page Getting Familiar with Keypad Callers MenuCalled MessageMaking and Answering Phone Calls Handset, Speakerphone and Headset ModeMake Calls using Numbers SEND/REDIALMENUkey 192 168 000 Make Calls using IP AddressAnswer an Incoming Call MENUkey 192168001020*45062Call Waiting and Call Flashing Handset Mode, Speakerphone/Headset ModeCall Hold Call TransferChecking Message and Message Waiting Indication Conference CallAttended Transfer Call Features Mute and DeleteConfiguration with Keypad Configuration GuideMenu Item Menu Functions Display 7 G-711u Display 10 Phy Addr Access the Web Configuration Menu Configuration with Web BrowserEnd User Configuration End User Password IP Address Time Zone Grandstream Device ConfigurationStatus Basic Advanced Account Settings DaylightDhcp IP WAN MACLAN Dhcp DMZ IPWAN side http access PasswordDevice Mode End UserCloned WAN MAC Addr PPPoE Link Up disabledProduct Model BT200 LAN Dhcp Base IPAdvanced User Configuration Account Settings Status BasicAutomatic Upgrade Silence AdminTimeout Use # as SuppressionPort UpgradeLocal RTP Use RandomDtmf Option 42 to Disable CallUpdate Override NTPAccount Active Authenticate IDAuthenticate Password Account Name MyCompanyAuto Answer SIP Server Individual Account SettingsAccount Name SIP User IDMWI Disable Missed-Call Enable CallFeatures TimerUAS Specify Enable 100relSpecial Feature Force InviteSaving the Configuration Changes Rebooting the Phone from RemoteConfiguration through Central Provisioning Server Upgrade through Http Firmware UpgradeUpgrade through Tftp Page Restore Factory Default Setting StepAppendix I Glossary of Terms DSP DNSDid FqdnFXS Echo CancellationFXO DhcpIVR HttpIP-PBX MTUOBP/SBC NATNTP PstnStun SDPSIP TCPVlan VoIP