Cisco Systems 7935 quick start Conference Calls, Meet Me, Muting a call, Placing a conference call

Muting a call

•While on a call, press the Mute button.

The LEDs blink red and a Mute icon appears in the LCD screen display.

•To turn off Mute, press the Mute button again.

Conference Calls

Placing a conference call

Step 1 Press the Phone button.

Step 2 Dial the number of the first party you want to add to the conference call. Step 3 After the party answers, press the Conf softkey to obtain a new line.

The other party is automatically placed on hold.

Step 4 Dial the number of the next party you want to add to the conference call.

Step 5 When the party answers, press the Conf softkey again to add the party to the conference call.

Repeat steps 3-5 to keep adding parties to a conference call.

Tip You can also add parties to a conference call using the phone book.

Ending a conference call

•Press the Phone button

Meet Me

The IP Conference Station supports Meet Me conferences. A Meet Me conference allows other callers to dial into the conference call. A Meet Me conference requires a special conference number that is configured by the system administrator. Contact your system administrator to obtain a directory number for a Meet Me conference.

21