Operation – Establish an Unsupervised Conference
1.First establish a conference (per above) with two or three outside lines.
2.Press !77. The Unsupervised Conference is established and your extension is returned to idle.
Operation – Rejoin an Unsupervised Conference
1.Press !77.
2.Your extension is rejoined to the conference connection.
Operation – Force Release a Conference Member (Conference Controller only)
1.While engaged in a conference the display shows:
XXXXXX XXX
private forced
2.Press [forced].
PRESS DIR# exit
3.Press [exit] to abort the operation and return to the conference.
Or…
3.Dial the directory number (outside line number or Extension number)
to release. (You may also simply press the outside line button or DSS button of the outside line/extension to be released.)
4.That conference member is disconnected and you are rejoined in conference with the remaining members.
5.Hang up to end the Conference.
Operation – Private Connection with a Conference Member (Conference Controller only)
1.While engaged in a conference the display shows:
XXXXXX XXX
private forced
2.Press [private]
PRESS DIR# exit
3.Press [exit] to abort the operation and return to the conference.
Page 8 | P7292 DETUG 09/01 |