password). The attendant extension can set the system mode of operation using the Evening Mode code or a feature button programmed with the code for simple
Operation – Change Service Mode
1.At the attendant extension:
1.1.Press the button programmed with the Service Mode feature code.
Or enter the feature code…
1.2. Press !63.
PSWD :_
1.3. Input the attendant extension password.
2.The Service Mode is advanced to the next mode.
3.Repeat until the appropriate mode of service displays.
Page Allow/Deny | !/9 |
You can block
Operation – Setup
1.When the extension is idle, press !/9.
PAGING DENY
2.Press !/9 again to enable page announcements at your extension.
PAGING ACCEPT
Pause/Pause Insertion
Pause Insertion is used to generate an intentional delay in dialing on outgoing outside line calls. You can store a pause or a combination of pauses in the Speed Dial bins to allow timed access to special services while allowing you to monitor the progress of the call.
A pause will appear as “P” on the display.
Operation
When storing numbers in speed dial, use the feature code !70 to insert a pause.
Page 48 | P7292 DETUG 09/01 |