Vertical Communications DX-80TM manual Extension Feature Status Check, Extension Password

3.When the display reverts back to idle condition, the “DND” is removed from the display.

Extension Feature Status Check			!.8
To find out the current condition of features on your telephone, press
!/8 and review the following features:
a)	LNR = empty	m)	Day COS = 0
b)	SNR = No Saved Number	n)	Eve COS = 0
c)	Memo = No Saved	o)	Monitor COS = 5
	Number	p)	Warning Tone = No
d)	Telephone Lock = No	q)	Drop Call Out = No
e)	Auto Hold = No	r)	Drop Call In = No
f)	Page Receive = Yes	s)	Intrusion Active = Yes
g)	Busy Ring = Yes	t)	Intrusion Accept = Yes
h)	Hotline to = NULL	u)	Intrusion Tone = Yes
i)	Position	v)	ECF Operation = No
j)	Tenant Group	w)	SMDR Output = Yes
k)	Pickup Group	x)	ICM Mode = VC-HF/PR/TN

l)Paging Group

Operation

1.The telephone must be idle.

2.Press !/8.

3.The display shows the contents of LNR (Last Number Redial).

4.Use the right Interactive button [next ] to advance through all of the various extension features.

Extension Password !97

All extensions of the DX-80 system have an associated User Password. Passwords are used to facilitate Phone Lock, Call Forward Remote and Attendant features. Password length is from four to eight characters and is determined in system programming.

Operation – Change Your Extension Password

1.Press !97.

PSWD :_ bksp show chg

DX-80 Digital Executive Telephone User Guide Page 39