4.2. To program a feature code, press [ftr].
FTR CODE:_ bksp save chg
4.2.1.Press the ! button.
4.2.2.Input the feature code 6/ (for CID Table review) and then press [save].
5.Continue programming other Flexible Feature Buttons or lift/replace the handset to exit this programming.
Headset Mode | !9/ |
All Digital Speakerphones have a standard 2.5 millimeter headset jack. When Headset Mode is selected (either by pressing a preprogrammed
headset feature key or dialing the Headset Mode code), the button is used to activate/deactivate the headset.
When you press the button, Headset Mode active and the extension
status changes to an
Operation – Activate Headset Mode
1.While the telephone is idle, press !9/ or press the Flexible Feature button designated as HEADSET MODE (if available). The display indicates the new status:
HEADSET ENABLED
Operation – Deactivate Headset Mode
1.While the telephone is idle, press !*9/ or press the Flexible Feature button programmed with the Headset Mode code. The display indicates the new status:
HEADSET DISABLED
Operation – Use the Headset to Place a Call
1.While the telephone is idle, press , a DSS button, or outside line
button. The button LED flashes to indicate that the headset is active. You hear Intercom dial tone, outside line dial tone, or Intercom
2.Press again to disconnect the current call.
Page 42 | P7292 DETUG 09/01 |