Vertical Communications DX-80 manual Auto Hold Allow, Using Automatic Hold

Programming Your Phone

1.Press Func + 9 + 2. The current time displays (NULL=none).

2.Press the chg soft key to enter a new alarm alert time.

3.Enter the alarm time in “HHMM” 24-hour format (HH = hr, MM = min.).

4.Press the save soft key.

5.Select one for a one-time alarm or always for repeated alarm.

To deactivate the alarm clock feature, perform the following steps.

1.Press Func + 9 + 2. The current time displays (NULL=none).

2.Press the del soft key to turn off the alarm alert time.

2.2.2 USING AUTOMATIC HOLD

If you are on a call and you press an outside line button, the Auto- matic Hold feature automatically places the current call on hold. For instance, if you are currently on a call on line 1 and you press line 2, the call on line 1 is placed on Exclusive Hold automatically. Simi- larly, if you are currently on an intercom call with another DX-80 extension and you press an outside line button, the intercom call is placed on Exclusive hold. With Automatic Hold, you do not need to press the Hold button unless you want to place a call on System Hold.

To activate Automatic Hold, press Func + 9 + 4. You then hear con- firmation tone and the display shows the following.

(())

AUTO HOLD ALLOW

The extension returns to an idle state.

To deactivate Automatic Hold, press Func + 9 + 4. You then hear confirmation tone and the display shows the following.

38 Comdial May ‘05