Oricom M5200 Series manual Recall feature, Call waiting, Take two different calls at the same time

Page 15

BASIC OPERATION

Recall feature

Recall feature can be used when you are using some services provided by your network operators such as “call waiting”, etc. A subscription may apply for these services, contact your network operator for more information.

While you are talking on the phone, press R key on the base unit or key on the cordless handset to send a Recall.

Call waiting

You can use the recall function to answer a second call while you are on the phone. However this service needs to be turned on. For example, to turn on Telstra’s Call Waiting service:

1. Press on the base unit or on the cordless handset to wait for dial tone then

press 43#.

2. You will hear a service tone then press mentioned above.

Take two different calls at the same time

During a call, you will hear two loud beeps periodically to notify you of another incoming call. If you wish to answer this call,

1. Press R key. You will hear a dial tone.

2. Press 2 to put the current call on hold and talk with the second caller.

3. Repeat steps 1-2 to swap between the two callers.

Recall settings are: Australia (100ms, SHORT).

If this feature does not work correctly, check the country option. To change the Recall

settings, press and hold /P key on the cordless handset to switch between “LONG” and “SHORT” on the display.

13

Image 15
Contents Keep this user guide for future reference User GuideCustomer Support Contents Caller ID Operation …………………………………………………………… Answering Machine Operation ……………………………………………… Adaptor for Charger Important do YOU have BOADBAND/ADSL? Installation and ChargerGetting Started TipPurchasing additional handsets Pack contentsYour cordless handset Keypad lock Right Arrow / Message waiting Understanding the cordless handset displayYour M5200 base unit GS Answering Machine Rings Code Answering Machine PIN BottomBasic Operation During standbyAnswering an incoming call Pre-dialling Mute featureMaking an external call Normal diallingRecall feature Call waitingTake two different calls at the same time Pause feature when using on a Pabx Handsfree modeRecall function when connected to a Pabx Ringer volume control Volume adjustment with base unitVolume adjustment with handset Speaker volume controlCaller ID Operation Review Caller ID recordsStore a CID number Delete all viewed CID records Delete one or all CID recordsRedial the last number LNR Function Last Number RedialDelete last number dialled Store the last number dialledPhonebook Add new recordsReview / Edit / Dial stored Phonebook records John Delete one recordHandset ringer melody Handset ringer adjustmentHandset ringer volume Cordless Handset OperationIntercom function Multi-handset OperationCall transfer between cordless handsets Cordless handset keypad lock RegistrationRegister new handsets on the M5200 base Remove handsets PIN ?Handset name ResetDay/Time setting Answering Machine OperationAnswering machine On / Off Answering machine PIN number Setting Answering machine Ring delay SettingOGM Outgoing Messages OGM1 Announcement One modeOGM2 Announcement Two mode OGM settingPlay OGM Delete OGMOGM play to line ICM Incoming Messages Record ICMPlay ICM Play memo MemoDelete messages Record memoDelete all messages Memory fullPage Call screening Cordless handset detectionRemote operation keys Remote turn-on Toll saverAppendix TroubleshootingKeypad does Phone Oricom M5200 Specifications Product SpecificationsWarranty Information WarrantyExclusion and limitation of liability Customer Support