Oricom M5200 Series manual Getting Started, Installation and Charger, Tip

Page 7

GETTING STARTED

Getting Started

Installation and Charger

1. Connect the mains adaptor (supplied) to the socket on the back of the base unit and to the wall mains supply.

AC110~240V

2. Connect the telephone cord to the phone socket on the back of the base unit and into the wall phone socket.

3. Insert 2 rechargeable Ni-MH AAA batteries (included), ob- serving the correct polarity, into the battery compartment on

the handset. Slide the battery door ﬁrmly into place.

4. Place the handset on the charging cradle and charge the bat- teries for a full 15 hours before using it for the ﬁrst time.

Note: It may take some time for the cordless handset to

power up, and it may get warm during initial charge. This is normal.

Tip!

It is good practice to put the cordless handset on the charging cradle when it is not in use to ensure that the handset is always fully charged.

Important: DO YOU HAVE BOADBAND/ADSL?

If you do, you must connect an in line ﬁlter (not supplied) between the telephone socket and your M5200 base to ensure that your broadband and M5200 will work properly. If you do not install the ﬁlter you will experience interference on the M5200 and your Broadband may suffer dropouts. Please refer to the user guide of the in line ﬁlter for installation.

5

Image 7

Contents Keep this user guide for future reference User GuideCustomer Support Contents Caller ID Operation …………………………………………………………… Answering Machine Operation ……………………………………………… Adaptor for Charger Important do YOU have BOADBAND/ADSL? Installation and ChargerGetting Started TipPurchasing additional handsets Pack contentsYour cordless handset Keypad lock Right Arrow / Message waiting Understanding the cordless handset displayYour M5200 base unit GS Answering Machine Rings Code Answering Machine PIN BottomDuring standby Basic OperationAnswering an incoming call Pre-dialling Mute featureMaking an external call Normal diallingCall waiting Recall featureTake two different calls at the same time Handsfree mode Pause feature when using on a PabxRecall function when connected to a Pabx Ringer volume control Volume adjustment with base unitVolume adjustment with handset Speaker volume controlReview Caller ID records Caller ID OperationStore a CID number Delete all viewed CID records Delete one or all CID recordsRedial the last number LNR Function Last Number RedialDelete last number dialled Store the last number dialledAdd new records PhonebookReview / Edit / Dial stored Phonebook records John Delete one recordHandset ringer melody Handset ringer adjustmentHandset ringer volume Cordless Handset OperationIntercom function Multi-handset OperationCall transfer between cordless handsets Registration Cordless handset keypad lockRegister new handsets on the M5200 base Remove handsets PIN ?Handset name ResetAnswering Machine Operation Day/Time settingAnswering machine On / Off Answering machine PIN number Setting Answering machine Ring delay SettingOGM Outgoing Messages OGM1 Announcement One modeOGM2 Announcement Two mode OGM settingDelete OGM Play OGMOGM play to line Record ICM ICM Incoming MessagesPlay ICM Play memo MemoDelete messages Record memoDelete all messages Memory fullPage Cordless handset detection Call screeningRemote operation keys Remote turn-on Toll saverAppendix TroubleshootingKeypad does Phone Oricom M5200 Speciﬁcations Product SpeciﬁcationsWarranty Warranty InformationExclusion and limitation of liability Customer Support