Oricom M5200 Series Answering Machine Operation, Answering machine On / Off, Day/Time setting

Page 30

ANSWERING MACHINE OPERATION

Answering Machine Operation

Answering machine On / Off

During standby mode,

1. Press and hold key to switch the answering machine off. “Answering off” will be heard followed by two short beeps.

Note: During Off mode, the answering machine is set to Announcement Two mode automatically. It will answer the call after 12 rings, and then switch to remote control mode. This feature can not be turned off.

During Off mode,

1. Press and hold key to switch the answering machine on. “Answering on, Announcement One” will be heard followed by a short beep.

Day/Time setting

Default day and time – Sunday, 12:30

1. Press and hold			key for 2 seconds. The voice prompt “Set day” will be heard.
2. Press	ANS	or	MEMO	key to select day. Voice prompt at each selection will be

heard.

3. Press key to conﬁrm and go to next setting. The voice prompt “Set hour” will be heard.

4. Press	ANS	or	MEMO	key to select hours. Voice prompt at each selection will be
heard.

5. Press key to conﬁrm and go to next setting. The voice prompt “Set minute” will be heard.

6. Press

ANS

or

MEMO

key to select minutes. Voice prompt at each selection will

be heard.

7. Press key to conﬁrm setting and go back to standby or off mode.

28

Image 30

Contents User Guide Keep this user guide for future referenceCustomer Support Contents Caller ID Operation …………………………………………………………… Answering Machine Operation ……………………………………………… Adaptor for Charger Tip Installation and ChargerGetting Started Important do YOU have BOADBAND/ADSL?Pack contents Purchasing additional handsetsYour cordless handset Understanding the cordless handset display Keypad lock Right Arrow / Message waitingYour M5200 base unit Bottom GS Answering Machine Rings Code Answering Machine PINBasic Operation During standbyAnswering an incoming call Normal dialling Mute featureMaking an external call Pre-diallingRecall feature Call waitingTake two different calls at the same time Pause feature when using on a Pabx Handsfree modeRecall function when connected to a Pabx Speaker volume control Volume adjustment with base unitVolume adjustment with handset Ringer volume controlCaller ID Operation Review Caller ID recordsStore a CID number Delete one or all CID records Delete all viewed CID recordsLNR Function Last Number Redial Redial the last numberStore the last number dialled Delete last number dialledPhonebook Add new recordsReview / Edit / Dial stored Phonebook records Delete one record JohnCordless Handset Operation Handset ringer adjustmentHandset ringer volume Handset ringer melodyMulti-handset Operation Intercom functionCall transfer between cordless handsets Cordless handset keypad lock RegistrationRegister new handsets on the M5200 base PIN ? Remove handsetsReset Handset nameDay/Time setting Answering Machine OperationAnswering machine On / Off Answering machine Ring delay Setting Answering machine PIN number SettingOGM setting OGM1 Announcement One modeOGM2 Announcement Two mode OGM Outgoing MessagesPlay OGM Delete OGMOGM play to line ICM Incoming Messages Record ICMPlay ICM Record memo MemoDelete messages Play memoMemory full Delete all messagesPage Call screening Cordless handset detectionRemote operation keys Toll saver Remote turn-onTroubleshooting AppendixKeypad does Product Speciﬁcations Phone Oricom M5200 SpeciﬁcationsWarranty Information WarrantyExclusion and limitation of liability Customer Support