Oricom M5200 Series Answering machine Ring delay Setting, Answering machine PIN number Setting

Page 31

ANSWERING MACHINE OPERATION

Answering machine Ring delay Setting

This setting is used to set the ring times.

Default number of ring -3

1. Press and hold 2-9/GS key (bottom of base) for 2 seconds.

“Set rings” will be heard followed by a short beep, after a pause then prompt current rings.

2. Press

ANS

or

MEMO

key to select item. Voice prompt at each selection will be

heard. There are 2-9 and TS mode (Toll saver) for you to select.

3. Press 2-9/GS key to conﬁrm setting and go back to standby or off mode.

Answering machine PIN number Setting

Default code - 000

1. Press and hold CODE key (bottom of base) for 2 seconds. “Set security code” can be heard followed by a short beep, after a pause then prompt the ﬁrst code.

2. Press

ANS

or

MEMO

key to select the ﬁrst digit. Voice prompt at each selection

will be heard.

3. Press CODE key located on the bottom of the base (see page 10) to conﬁrm setting and go to next setting. The voice prompt will be heard.

4. Press

ANS

or

MEMO

key to select the second digit. Voice prompt at each

selection will be heard.

5. Press CODE key to conﬁrm setting and go to next setting. The voice prompt will be heard.

6. Press

ANS

or

MEMO

key to select the third digit. Voice prompt at each

selection will be heard.

7. Press CODE key to conﬁrm setting and go back to standby or off mode.

Note: Press key any time or 5 seconds without any operation will quit setting mode and will go back to standby or off mode. All settings are unchanged.

29

Image 31

Contents Keep this user guide for future reference User GuideCustomer Support Contents Caller ID Operation …………………………………………………………… Answering Machine Operation ……………………………………………… Adaptor for Charger Important do YOU have BOADBAND/ADSL? Installation and ChargerGetting Started TipPurchasing additional handsets Pack contentsYour cordless handset Keypad lock Right Arrow / Message waiting Understanding the cordless handset displayYour M5200 base unit GS Answering Machine Rings Code Answering Machine PIN BottomDuring standby Basic OperationAnswering an incoming call Pre-dialling Mute featureMaking an external call Normal diallingCall waiting Recall featureTake two different calls at the same time Handsfree mode Pause feature when using on a PabxRecall function when connected to a Pabx Ringer volume control Volume adjustment with base unitVolume adjustment with handset Speaker volume controlReview Caller ID records Caller ID OperationStore a CID number Delete all viewed CID records Delete one or all CID recordsRedial the last number LNR Function Last Number RedialDelete last number dialled Store the last number dialledAdd new records PhonebookReview / Edit / Dial stored Phonebook records John Delete one recordHandset ringer melody Handset ringer adjustmentHandset ringer volume Cordless Handset OperationIntercom function Multi-handset OperationCall transfer between cordless handsets Registration Cordless handset keypad lockRegister new handsets on the M5200 base Remove handsets PIN ?Handset name ResetAnswering Machine Operation Day/Time settingAnswering machine On / Off Answering machine PIN number Setting Answering machine Ring delay SettingOGM Outgoing Messages OGM1 Announcement One modeOGM2 Announcement Two mode OGM settingDelete OGM Play OGMOGM play to line Record ICM ICM Incoming MessagesPlay ICM Play memo MemoDelete messages Record memoDelete all messages Memory fullPage Cordless handset detection Call screeningRemote operation keys Remote turn-on Toll saverAppendix TroubleshootingKeypad does Phone Oricom M5200 Speciﬁcations Product SpeciﬁcationsWarranty Warranty InformationExclusion and limitation of liability Customer Support