Oricom M5200 Series OGM Outgoing Messages, OGM1 Announcement One mode, OGM2 Announcement Two mode

Page 32

ANSWERING MACHINE OPERATION

OGM (Outgoing Messages)

M5200 has two OGM message modes:

OGM1 (Announcement One) mode:

Callers can hear a pre-recorded message “Please leave a message after the beep” and the unit records the caller's message.

OGM2 (Announcement Two) mode:

Callers can hear the other pre-recorded message “Please call later”. Under this mode, the caller will NOT have the opportunity to leave a message.

You can also record your own personalized greeting (from 3 seconds to 120 seconds).

Note: The default setting is OGM1 (Announcement One).

OGM setting

Press key to switch between OGM1 and OGM2.

Record OGM

1. Press key to select OGM1 mode or OGM2 mode.

2. Press and hold ANS key until you hear a long beep and see light ﬂash.

3. Speak into the microphone (15cm from the base unit’s microphone).

4. Press key to stop recording, the machine will play back recording for review.

Note: If the OGM is less than 3 seconds, it is not valid. The machine will stop automatically after 2 minutes.

30

Image 32

Contents User Guide Keep this user guide for future referenceCustomer Support Contents Caller ID Operation …………………………………………………………… Answering Machine Operation ……………………………………………… Adaptor for Charger Installation and Charger Getting StartedTip Important do YOU have BOADBAND/ADSL?Pack contents Purchasing additional handsetsYour cordless handset Understanding the cordless handset display Keypad lock Right Arrow / Message waitingYour M5200 base unit Bottom GS Answering Machine Rings Code Answering Machine PINAnswering an incoming call Basic OperationDuring standby Mute feature Making an external callNormal dialling Pre-diallingTake two different calls at the same time Recall featureCall waiting Recall function when connected to a Pabx Pause feature when using on a PabxHandsfree mode Volume adjustment with base unit Volume adjustment with handsetSpeaker volume control Ringer volume controlStore a CID number Caller ID OperationReview Caller ID records Delete one or all CID records Delete all viewed CID recordsLNR Function Last Number Redial Redial the last numberStore the last number dialled Delete last number dialledReview / Edit / Dial stored Phonebook records PhonebookAdd new records Delete one record JohnHandset ringer adjustment Handset ringer volumeCordless Handset Operation Handset ringer melodyMulti-handset Operation Intercom functionCall transfer between cordless handsets Register new handsets on the M5200 base Cordless handset keypad lockRegistration PIN ? Remove handsetsReset Handset nameAnswering machine On / Off Day/Time settingAnswering Machine Operation Answering machine Ring delay Setting Answering machine PIN number SettingOGM1 Announcement One mode OGM2 Announcement Two modeOGM setting OGM Outgoing MessagesOGM play to line Play OGMDelete OGM Play ICM ICM Incoming MessagesRecord ICM Memo Delete messagesRecord memo Play memoMemory full Delete all messagesPage Remote operation keys Call screeningCordless handset detection Toll saver Remote turn-onTroubleshooting AppendixKeypad does Product Speciﬁcations Phone Oricom M5200 SpeciﬁcationsExclusion and limitation of liability Warranty InformationWarranty Customer Support