Oricom M5200 Series manual Pause feature when using on a Pabx, Handsfree mode

Page 16

BASIC OPERATION

Recall function when connected to a PABX

If you have connected your telephone to a PABX, you can use all the facilities such as call transfer, automatic recall, etc. The R key provides access to these facilities.

Pause feature when using on a PABX

Note: The pause function described in this section is only necessary when the M5200 is used on older PABX’s.

With some PABX's, there is a short pause between the code for the outside line (usually 0 or 9) and obtaining dial tone. A pause needs to be entered manually and stored in the phone book so that the numbers are not dialled too quickly.

When storing numbers in memory, you can include the outside line access digit (e.g. ‘9’ or ‘0’) with each phone number. LNR function or memory dial may not work when using your telephone on a PABX. Insert a pause between the OUTSIDE LINE DIGIT & the

TELEPHONE NUMBER.

1. Press the numeric keys to enter the OUTSIDE LINE DIGIT.

2. Press /P key to insert a pause.

3. Press the numeric keys to enter the TELEPHONE NUMBER.

Handsfree mode

During talking mode,

1. Press key to switch to speakerphone mode.

2. Press key again to cancel this feature.

Or

During standby mode,

1. Press and hold key to switch to speakerphone mode.

2. Press key again to cancel this feature.

14

Image 16

Contents User Guide Keep this user guide for future referenceCustomer Support Contents Caller ID Operation …………………………………………………………… Answering Machine Operation ……………………………………………… Adaptor for Charger Installation and Charger Getting StartedTip Important do YOU have BOADBAND/ADSL?Pack contents Purchasing additional handsetsYour cordless handset Understanding the cordless handset display Keypad lock Right Arrow / Message waitingYour M5200 base unit Bottom GS Answering Machine Rings Code Answering Machine PINDuring standby Basic OperationAnswering an incoming call Mute feature Making an external callNormal dialling Pre-diallingCall waiting Recall featureTake two different calls at the same time Handsfree mode Pause feature when using on a PabxRecall function when connected to a Pabx Volume adjustment with base unit Volume adjustment with handsetSpeaker volume control Ringer volume controlReview Caller ID records Caller ID OperationStore a CID number Delete one or all CID records Delete all viewed CID recordsLNR Function Last Number Redial Redial the last numberStore the last number dialled Delete last number dialledAdd new records PhonebookReview / Edit / Dial stored Phonebook records Delete one record JohnHandset ringer adjustment Handset ringer volumeCordless Handset Operation Handset ringer melodyMulti-handset Operation Intercom functionCall transfer between cordless handsets Registration Cordless handset keypad lockRegister new handsets on the M5200 base PIN ? Remove handsetsReset Handset nameAnswering Machine Operation Day/Time settingAnswering machine On / Off Answering machine Ring delay Setting Answering machine PIN number SettingOGM1 Announcement One mode OGM2 Announcement Two modeOGM setting OGM Outgoing MessagesDelete OGM Play OGMOGM play to line Record ICM ICM Incoming MessagesPlay ICM Memo Delete messagesRecord memo Play memoMemory full Delete all messagesPage Cordless handset detection Call screeningRemote operation keys Toll saver Remote turn-onTroubleshooting AppendixKeypad does Product Speciﬁcations Phone Oricom M5200 SpeciﬁcationsWarranty Warranty InformationExclusion and limitation of liability Customer Support