Oricom eco5200 Series Answering Machine Operation, Answering machine On / Off, Day/Time setting

Page 30

ANSWERING MACHINE OPERATION

Answering Machine Operation

Answering machine On / Off

During standby mode,

 

1. Press and hold

key to switch the answering machine off.

Answering off” will be heard followed by two short beeps.

Note: During Off mode, the answering machine is set to Announcement Two mode automatically. It will answer the call after 12 rings, and then switch to remote control mode. This feature can not be turned off.

During Off mode,

1. Press and hold key to switch the answering machine on. “Answering on, Announcement One” will be heard followed by a short beep.

Day/Time setting

Default day and time – Sunday, 12:30

1. Press and hold

key for 2 seconds. The voice prompt “Set day” will be heard.

2. Press ANS

or

MEMO key to select day. Voice prompt at each selection will be

heard.

 

 

3. Press key to confi rm and go to next setting. The voice prompt “Set hour” will be heard.

4. Press ANS or MEMO key to select hours. Voice prompt at each selection will be heard.

5. Press key to confi rm and go to next setting. The voice prompt “Set minute” will be heard.

6. Press ANS or MEMO key to select minutes. Voice prompt at each selection will be heard.

7. Press key to confi rm setting and go back to standby or off mode.

26

Image 30
Contents User Guide Keep this user guide for future referenceContents Caller ID Operation …………………………………………………………… Answering Machine Operation ……………………………………………… Page Important do YOU have BOADBAND/ADSL? Installation and ChargerGetting Started TipGetting Started Pack contents Purchasing additional handsetsYour cordless handset Understanding the cordless handset display Your eco5200 base unit Bottom GS Answering Machine Rings Code Answering Machine PINBasic Operation During standbyAnswering an incoming call Normal dialling Mute featureMaking an external call Pre-diallingRecall feature Call waiting Australia onlyTake two different calls at the same time Pause feature when using on a Pabx Handsfree modeRecall function when connected to a Pabx Speaker volume control Volume adjustment with base unitVolume adjustment with handset Ringer volume controlCaller ID Operation Review Caller ID recordsStore a CID number Delete one or all CID records Delete all viewed CID recordsLNR Function Last Number Redial Redial the last numberStore the last number dialled Delete last number dialledPhonebook Add new recordsReview / Edit / Dial stored Phonebook records Delete one record JohnCordless Handset Operation Handset ringer adjustmentHandset ringer volume Handset ringer melodyMulti-handset Operation Intercom functionCall transfer between cordless handsets Cordless handset keypad lock RegistrationRegister new handsets on the eco5200 base Language setting Remove handsetsReset Handset nameDay/Time setting Answering Machine OperationAnswering machine On / Off Answering machine Ring delay Setting Answering machine PIN number SettingOGM setting OGM1 Announcement One modeOGM2 Announcement Two mode OGM Outgoing MessagesPlay OGM OGM play to lineICM Incoming Messages Record ICMPlay ICM Record memo MemoDelete messages Play memoMemory full Delete all messagesPage Call screening Cordless handset detectionRemote operation keys Toll saver Remote turn-onCustomer Support Troubleshooting AppendixAlternatively please contact Customer Service on 1300 889 Product Specifications Phone Oricom eco5200 SpecificationsWarranty Information Warranty AustraliaExclusion and limitation of liability REN RN for New Zealand Caller IDCustomer Support