Oricom eco5200 Series manual Pause feature when using on a Pabx, Handsfree mode

Page 16

BASIC OPERATION

Recall function when connected to a PABX

If you have connected your telephone to a PABX, you can use all the facilities such as call transfer, automatic recall, etc. The R key provides access to these facilities.

Pause feature when using on a PABX

Note: The pause function described in this section is only necessary when the eco5200 is used on older PABX’s.

With some PABX's, there is a short pause between the code for the outside line (usually 0 or 9) and obtaining dial tone. A pause needs to be entered manually and stored in the phone book so that the numbers are not dialled too quickly.

When storing numbers in memory, you can include the outside line access digit (e.g. ‘9’ or ‘0’) with each phone number. LNR function or memory dial may not work when using your telephone on a PABX. Insert a pause between the OUTSIDE LINE DIGIT & the

TELEPHONE NUMBER.

1. Press the numeric keys to enter the OUTSIDE LINE DIGIT.

2. Press /P key to insert a pause.

3. Press the numeric keys to enter the TELEPHONE NUMBER.

Handsfree mode

During talking mode,

1. Press

key to switch to speakerphone mode.

2. Press key again to cancel this feature.

Or

During standby mode,

1. Press and hold

key to switch to speakerphone mode.

2. Presskey again to cancel this feature.

12

Image 16

Contents User Guide Keep this user guide for future referenceContents Caller ID Operation …………………………………………………………… Answering Machine Operation ……………………………………………… Page Installation and Charger Getting StartedImportant do YOU have BOADBAND/ADSL? TipGetting Started Pack contents Purchasing additional handsetsYour cordless handset Understanding the cordless handset display Your eco5200 base unit Bottom GS Answering Machine Rings Code Answering Machine PINDuring standby Basic OperationAnswering an incoming call Mute feature Making an external callNormal dialling Pre-diallingCall waiting Australia only Recall featureTake two different calls at the same time Handsfree mode Pause feature when using on a PabxRecall function when connected to a Pabx Volume adjustment with base unit Volume adjustment with handsetSpeaker volume control Ringer volume controlReview Caller ID records Caller ID OperationStore a CID number Delete one or all CID records Delete all viewed CID recordsLNR Function Last Number Redial Redial the last numberStore the last number dialled Delete last number dialledAdd new records PhonebookReview / Edit / Dial stored Phonebook records Delete one record JohnHandset ringer adjustment Handset ringer volumeCordless Handset Operation Handset ringer melodyMulti-handset Operation Intercom functionCall transfer between cordless handsets Registration Cordless handset keypad lockRegister new handsets on the eco5200 base Language setting Remove handsetsReset Handset nameAnswering Machine Operation Day/Time settingAnswering machine On / Off Answering machine Ring delay Setting Answering machine PIN number SettingOGM1 Announcement One mode OGM2 Announcement Two modeOGM setting OGM Outgoing MessagesPlay OGM OGM play to lineRecord ICM ICM Incoming MessagesPlay ICM Memo Delete messagesRecord memo Play memoMemory full Delete all messagesPage Cordless handset detection Call screeningRemote operation keys Toll saver Remote turn-onCustomer Support Troubleshooting AppendixAlternatively please contact Customer Service on 1300 889 Product Speciﬁcations Phone Oricom eco5200 SpeciﬁcationsWarranty Australia Warranty InformationExclusion and limitation of liability REN RN for New Zealand Caller IDCustomer Support