WARNINGS AND SAFETY INFORMATION
WARNINGS AND SAFETY INFORMATION
Avoid exposure of this telephone to moisture or liquid.
To prevent electric shock, do not open the handset or base cabinet.
Do not use the handset in an explosive hazard area such as where there is gas leaking.
Do not use your telephone during an electrical thunderstorm as it is possible to get an electric shock. Refer to information contained in the White Pages Directory.
As there is a slight chance that the telephone could be damaged by an electrical storm, it is recommended that users unplug the phone from the mains supply and telephone socket during an electrical storm.
We advise that this phone should not be used near intensive care medical equipment or by persons with pacemakers.
Because the phone works by sending radio signals between base station and handset, wearers of hearing aids may experience interference in the form of a humming noise.
Your phone can interfere with electrical equipment such as answering machines, TV and radio sets, clock radios and computers if placed too close. It is recommended that you position the base unit at least one metre from such appliances.
This telephone complies with applicable safety requirements for exposure to radio waves (EMR). The mean power of this telephone does not exceed 20mW limit at which point testing is required.
The earpiece of the handset may attract small metal objects such as staples and pins. Care should be taken when placing the handset near these items.
This telephone is not designed for making emergency telephone calls when the mains power fails. Always have a corded phone available to be able to make calls to emergency services if the mains power fails.
Privacy of communications may not be ensured when using this telephone.
Clean with a dry, soft,
•This phone is designed for connection to a PSTN telephone line or an analogue extension port of a PBX system. If you connect this device to a digital extension of a PBX system, damage may result to the PBX.
CAUTION
Use only the mains adaptors supplied with this product. Incorrect adaptor polarity or voltage can seriously damage the unit.
Adaptor for base: Input:100~240VAC 50Hz/60Hz 150mA Output: 6.5VDC 400mA
Adaptor for Charger: Input:100~240VAC 50Hz/60Hz 100mA Output: 6.5VDC 200mA
1