
ANSWERING MACHINE OPERATION
Answering machine Ring delay Setting
This setting is used to set the ring times.
Default number of ring
1. Press and hold
“Set rings” will be heard followed by a short beep, after a pause then prompt current rings.
2. Press ANS or
MEMO
key to select item. Voice prompt at each selection will be heard. There are
3. Press key to confi rm setting and go back to standby or off mode.
Answering machine PIN number Setting
Default code - 000 |
| |
1. Press and hold | CODE key (bottom of base) for 2 seconds. “Set security code” | |
can be heard followed by a short beep, after a pause then prompt the fi rst code. | ||
2. Press ANS | or | MEMO key to select the fi rst digit. Voice prompt at each selection |
will be heard. |
|
|
3. Press CODE
key located on the bottom of the base (see page 8) to confi rm setting and go to next setting. The voice prompt will be heard.
4. Press ANS
or
MEMO
key to select the second digit. Voice prompt at each selection will be heard.
5. Press CODE
key to confi rm setting and go to next setting. The voice prompt will be heard.
6. Press ANS
or
MEMO
key to select the third digit. Voice prompt at each selection will be heard.
7. Press CODE
key to confi rm setting and go back to standby or off mode.
Note: Press key any time or 5 seconds without any operation will quit setting mode and will go back to standby or off mode. All settings are unchanged.
27