ANSWERING MACHINE OPERATION
Delete all messages
While the unit is in standby mode, you can delete all the old messages but not new messages.
Press and hold X key until you hear a long beep, and then “All message erased” will be heard. It means that the old messages will be deleted, but the new messages will not be deleted.
Remember to delete messages!
To avoid exceeding the memory storage capacity, always delete messages after listening.
Note: The unit will NOT delete the messages you have NOT listened to.
Memory full
Memory will be full in the following 2 cases:
1. During Memo/OGM/ICM recording, the unit becomes full.
2. The memory is full and somebody is trying to record new Memo/OGM/ICM message.
In both the above situations, the unit will prompt “Answering Machine Full”.
OGM mode will change to OGM 2 automatically after Memory full.
32