Telephone Operation
°"*+06"°"
To select the desired letter, refer to the letters on the number keys. Press once for the first uppercase letter, twice for the second letter, and so on. To enter a lowercase letter, press four or five times for the first lowercase letter, five or six times for the second letter, and so on.
For example, to enter John: press 5 once; upper case @ appears. Then press 6 six times; lower case e appears. Press 4 five times; lower case ^ appears. Finally, press 6 five times; lower case d appears.
5VQTKPI"C"0COG"CPF"0WODGT"KP" /GOQT[
When you are storing a number in memory, an error tone sounds and the phone exits the storing process if you wait more than 30 seconds between each keypress. If you receive a call during memory entry, the phone exits the storing process.
1. Lift the handset.
2. Hold down MEM until C[cehoýIjeh[ and a list of memory location numbers appear.
3. Select a memory location
4. Press SEL. Ijeh[ýDWc[ appears. If you do not want to enter a name, skip to Step 6.
5. To enter a name, use the number keys.
To enter two letters from the same key in a row, press #/7 to move the cursor to the next position. For example to enter AB, press 2 so 7 appears. Then press #/7. The cursor moves to the next position. Press 2 twice so 8 appears.
°
To enter a space, press #/7 twice without entering any character.
To enter a number, repeatedly press the corresponding number key until the number appears.
To enter a special character, use 0. Each time you press 0, the following characters appear in this order:
∗çý#ý&ýâýá (space) &
If you make a mistake, use ∗6/TONE or #7 to move the cursor over the error, then enter the correct character, or press CH/DEL to delete a
18