Radio Shack 43-3817 owner manual Using Speed Dial Deleting a Number

11.Slots and openings in the telephone’s cabinet and the back or bottom are provided for ventilation. To protect the telephone from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.

12.This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your local power company.

13.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be stepped on.

14.Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

15.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

16.To reduce the risk of electric shock, do not disassemble this product. Take it to a qualified serviceman when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the product is subsequently used.

17.Unplug this product from the wall outlet and refer servicing to qualified services personnel under the following conditions:

•When the power cord plug is damaged or frayed.

•If liquid has been spilled into the product.

%106'065

(continued)
Using Speed Dial	22
Deleting a Number in
Memory	22
Caller ID Operation	23
Reviewing Caller ID
Records	23
Caller ID Messages	24
Adding/Deleting the Area
Code	24
Dialing Numbers from a
Caller ID Record	25
Storing a Caller ID Record in
Memory	25
Deleting Caller ID
Records	25
Answering System
Operation	26
Using the Menu Button ....	26
Setting the Day/Time	27
Setting the Number
of Rings	27
Setting the Record Time ..	28
Setting the Message Alert
Tone	28
Turning the Message Alert
Tone Off	29
Selecting the Outgoing
Message	29
Recording/Deleting an
Outgoing Message	30
Setting the System to Answer
Calls	30
Screening Calls	31
Recording Incoming
Messages	31
Recording a Memo	31
Recording a
Conversation	32
Playing Messages	32
Adjusting the Volume	33
Deleting Messages	33
Remote Operation	33
Setting the Security
Code	34
Using the Toll-Saver	34
Using Remote
Commands	34
Remote Commands	36
Troubleshooting	36
Care	38
FCC Statement	38
The FCC Wants
You to Know	38
Lightning	39

Important Safety Instructions

3