Telephone Operation
20
cursor to O[i, then press SEL or CH/DEL. The phone beeps, and C[cehoýdý:[b[j[Z appears.
=eý8WYa — Returns you to the list of memory numbers.
'PVGTKPI"C"2CWUG
Some telephone systems require you to dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you should also store a pause after the access code to allow the outside line time to connect.
To enter a
4GXKGYKPI"/GOQT["0WODGTU
To review your memory numbers, press MEM. The list of memory location numbers
To see the stored phone numbers, press #/7. An arrow to the right of the number means it is longer than 14 digits. Press #7 again to see the rest of the number. Repeatedly press ∗6/TONE to return to the name display.
To exit the memory number list, press END.
To see a stored name and phone number at the same time, press SEL when the cursor is by a memory location number. To exit this display, hold down CH/DEL until the screen clears, or press END.