For direct wall
mounting, align the base’s keyhole slots with the mounting screws and slide the base downward to secure it.
5.Plug the adapter into a standard AC outlet.
6.Lift the base’s antenna to a vertical position.
%100'%6+0)."%*#4)+0)"#0&" 4'2.#%+0)"6*'"$#66'4;"2#%-
The phone comes with a rechargeable
1.Press down and slide off the battery pack compartment cover.
2.Lift the battery pack out of the compartment.
3.Plug the battery pack’s connector into the socket in the
compartment. The connector fits only one way.
4. Put the battery pack in the compartment.
5. Replace the cover.
To charge the battery pack, place the handset on the base, face up or down. The base’s CHARGE indicator lights. #"
Recharge the battery pack when Bemý8Wjj[hoý flashes.±ý
#"+/2146#06"#
Be sure the battery pack is properly connected before you try to charge it. The CHARGE indicator lights when the handset is on the base even if the battery pack is not connected properly.
work, recharge the | Installation |
±"016'"±" |
|
• If the phone does not |
|
battery pack. (The |
|
battery power might be |
|
too low for the display to |
|
operate.) |
|
• If the battery pack |
|
| |
becomes weak during a |
|
call, the handset beeps |
|
andýBemý8Wjj[ho |
|
flashes. When this |
|
happens, you cannot |
|
make a call on the |
|
phone until you recharge |
|
the battery pack. |
|
• If the battery pack is |
|
completely discharged |
|
or the base loses power |
|
while the handset is |
|
away from it, place the |
|
handset on the base to |
|
reset the security |
|
| |
If it was the handset that |
|
lost power, recharge the |
|
battery pack. |
|
9