2TQDNGO | 5WIIGUVKQP |
|
|
|
|
|
|
The phone cannot be | Lift the base’s antenna to a vertical position. |
|
|
operated at a useful | The handset’s range has decreased. Return the handset to the |
|
|
distance from the base |
|
| |
cradle and recharge the battery pack. Replace the battery |
|
| |
because the signal |
|
| |
pack if necessary. |
|
| |
becomes weak or noisy. |
|
| |
|
|
| |
| If the charging contacts on the handset and base are dirty, |
|
|
The handset battery | clean them with a pencil eraser. |
|
|
pack does not charge. | Be sure the battery pack is connected correctly. |
|
|
|
|
|
|
| Replace the battery pack. |
|
|
| Move the base away from other electrical devices and sources |
|
|
| of noise. |
|
|
|
|
|
|
The handset does not | Move the handset closer to the base. |
|
|
ring or receive a page. | Lift the base’s antenna to a vertical position. |
|
|
|
|
|
|
| Be sure the battery pack is charged. (If the battery power is too |
|
|
| low, it does not have enough power to light the display.) |
|
|
You have an incoming | Let the phone ring twice before you answer, so the system has |
|
|
time to record the Caller ID information. |
|
| |
call, but do not receive |
|
| |
|
|
| |
any Caller ID | Check that the system is correctly and securely connected. |
|
|
information. | Verify with the phone company that your CID service is active. |
|
|
|
|
| |
| Move the handset closer to the base. |
|
|
| Lift the base’s antenna to a vertical position. |
|
|
|
|
|
|
| Be sure the battery pack is charged. (If the battery power is too |
|
|
The handset stops | low, it does not have enough power to light the display.) |
| Troubleshooting |
If the charging contacts on the handset and base are dirty, |
| ||
working or works poorly | If the base loses power while the handset is away, the security |
|
|
during a call. |
|
| |
| base, then place the handset back on the base. The CHARGE |
|
|
| indicator lights, indicating that the code is set again. |
|
|
|
|
|
|
| clean them with a pencil eraser. |
|
|
The system does not | Make sure the system is turned on and the AC adapter is |
|
|
properly connected. |
|
| |
answer calls. |
|
| |
Check all phone line connections. |
|
| |
|
|
| |
The system does not | Recording time is set to announce only. Set it to ' or *. |
|
|
record the caller’s |
|
|
|
Delete messages if the memory is full. |
|
| |
messages |
|
| |
|
|
| |
|
|
|
|
37