Radio Shack TAD-1010 owner manual Telephone Preparation, Installing the Handset Battery Pack

Page 13

43-771.fm Page 13 Friday, August 13, 1999 2:59 PM

TELEPHONE PREPARATION

INSTALLING THE HANDSET BATTERY PACK

To install the supplied rechargeable battery pack, place it on the battery compartment tracks, then slide it up (to- ward the antenna) until it locks in place.

Note: You must charge a new battery pack at least 24 hours before you use it the first time. See “Charging the Hand- set Battery Pack” on Page 14.

When the handset’s battery pack no longer recharges, replace the battery pack. You can order a replacement bat- tery pack from your local Radio Shack store.

To remove the battery pack, press the tab on the back of the handset, slide the battery pack down (away from the an- tenna) until it stops, then lift it up to re- move it.

Note: The phone uses a rechargeable nickel-cadmium battery pack. At the end of the battery pack’s useful life, it must be recycled or disposed of proper- ly. Contact your local, county, or state hazardous waste management authori- ties for information on recycling or dis- posal programs in your area. Some options that might be available are: mu- nicipal curbside collection, drop-off box- es at retailers, recycling collection centers, and mailback programs.

13

Image 13

Contents TAD-1010 FCC Statement Read this Before InstallationCordless Telephone Features FeaturesTAD Features Fm Page 5 Friday, August 13, 1999 259 PM Contents FCC Wants You to Know Installing Backup Battery InstallationPlacing the Base on a Desktop Selecting a LocationMounting the Base on a Wall Mounting on a Wall Plate Mounting Directly on the Wall Fm Page 12 Friday, August 13, 1999 259 PM Telephone Preparation Installing the Handset Battery PackCharging the Handset Battery Pack Setting the PULSE/ Tone Switch Setting the Telephone RingerTurning Off the Ringer Checking the RingerANSWERING/MAKING a Call Telephone OperationUsing Privacy Using RedialUsing Hold Using FlashChanging Channels UsingStoring a Number in Memory Memory OperationStoring a Pause in Memory Chain Dialing Service NumbersDialing a Stored Number Setting the Number of Rings TAD Setup and Basic OperationSetting the Remote Operation Security Code Setting the Number of Mailboxes Setting the DAY and TimeRecording an Announcement Selecting AN AnnouncementChecking the Outgoing Announcement Recording a Memo Setting the TAD to Answer CallsPlaying Messages Erasing Messages Adjusting the TAD’S VolumeAccessing the TAD by Remote Using the TOLL-SAVERRemote Operation From Another Phone LineUsing Remote Commands Remote Operation Commands Problem Suggestion TroubleshootingFm Page 33 Friday, August 13, 1999 259 PM Out of Range with No Call OUT of Range IndicationsOut of Range with a Call in Progress Care and Maintenance Lightning FCC Wants YOU to KnowFm Page 37 Friday, August 13, 1999 259 PM Fm Page 38 Friday, August 13, 1999 259 PM Fm Page 39 Friday, August 13, 1999 259 PM Radio Shack