Radio Shack TAD-1010 owner manual Troubleshooting, Problem Suggestion

43-771.fm Page 32 Friday, August 13, 1999 2:59 PM

TROUBLESHOOTING

We do not expect you to have any problems with your TAD-1010, but if you do, try these suggestions. If you still have problems, take your TAD-1010 to your local Radio Shack store for assistance.

Problem	Suggestion
Noise, static, or weak sig-
nal when the phone is	Move closer to the base or relocate the base.
away from the base.
Noise, static, or weak sig-	Place the handset in the base momentarily to
nal even when the phone	set the security access protection code and
is near the base.	reset the channel.
The TAD does not answer	Check all phone line connections.
	Make sure the AC adapter is properly con-
calls.
	nected to the base.
	Check the memory available and erase mes-
The TAD does not record	sages as required.
callers’ messages.	The TAD is set to Announcement 2 or OGM.
	Set the TAD to Announcement 1.
	Make sure the handset ringer is turned on.
	Check all phone line connections.
The handset does not ring
	Make sure the AC adapter is properly con-
when you receive a call.
	nected to the base.
	Unplug some of the other phones on the tele-
	phone line.
Your caller’s voice fades in	Move closer to the base or relocate the base.
and out.

32