Radio Shack TAD-1010 owner manual TAD Setup and Basic Operation, Setting the Number of Rings

43-771.fm Page 22 Friday, August 13, 1999 2:59 PM

TAD SETUP AND BASIC OPERATION

SETTING THE NUMBER OF RINGS

The TAD is preset to sound two rings before it answers the first call. Follow these steps to change the number of rings (two rings, four rings, or toll- saver).

Note: If you plan to check your messag- es by long distance, set the number of rings to toll-saver.

1.Press and hold SETUP for 2 sec- onds. The TAD beeps and rt and the current ring setting appear on the display.

MULTI-USER

DIGITAL ANSWERING SYSTEM

MAIL BOX

			MEMO
			ANNC.
			MEMORY
			SETUP
ERASE		ON/OFF	VOLUME
REPEAT	STOP	PLAY	SKIP

2.Press REPEAT or SKIP to scroll to the desired ring setting.

3.Press STOP or wait 3 seconds to exit the setup sequence. Or, press SETUP again to set the remote operation security code.

SETTING THE REMOTE OPERATION SECURITY CODE

The remote operation security code permits remote access to the TAD. Your remote operation security code can be any number from 00 to 99.

Note: The remote operation security code default setting is 99.

Follow these steps to change the re- mote operation security code.

1.Press and hold SETUP until the current remote operation security code appears on the display.

MULTI-USER
DIGITAL ANSWERING SYSTEM			MAIL BOX
			MEMO
			ANNC.
			MEMORY
			SETUP
ERASE		ON/OFF	VOLUME
REPEAT	STOP	PLAY	SKIP

2.Press REPEAT or SKIP to scroll to the desired two-digit code number.

3.Press STOP or wait 3 seconds to exit the setup sequence. Or, press SETUP again to set the day and time.

22