Radio Shack TAD-1010 owner manual OUT of Range Indications, Out of Range with No Call

43-771.fm Page 34 Friday, August 13, 1999 2:59 PM

OUT OF RANGE

INDICATIONS

If you move the TAD-1010’s handset out of the base’s range, the handset will not operate properly. While it is out of range, the handset sounds different alert tones and flashes various indicators.

Note: To turn off the out of range indica- tions while the handset is out of range, you can press TONE , #, or any num- ber key (0-9).

Out of Range with No Call

If you move the handset out of the base’s range when the handset is not in use, the handset’s CH indicator flashes and the handset beeps quietly at 10-30 second intervals. The handset might not ring for incoming calls. When you move the handset back within range of the base again, the CH indicator turns off and the handset stops beeping.

If the base is unplugged, the handset sounds the out-of-range warning beeps and CH flashes until the base is powered again and the handset is returned to the base. To turn off the out of range warn- ings, press any handset key until the handset beeps.

34

Out of Range with a Call in Progress

If you move the handset out of the base’s range while a call is in progress, the handset’s CH indicator lights steadi- ly, the handset beeps quietly at 5- second intervals, and you and the other party cannot hear each other.

If you move the handset back within the base’s range within 30 seconds, the CH indicator turns off, the handset stops beeping, and you can resume your phone conversation.

If you keep the handset out of the base’s range for 30 seconds or more, the call is disconnected (the TALK indi- cator turns off), the CH indicator begins to flash, and the handset begins to beep at 10-30 second intervals. When you move the handset back within range of the base again, the indicator turns off and the handset stops beeping.