Radio Shack TAD-1010 owner manual Mounting on a Wall Plate

43-771.fm Page 10 Friday, August 13, 1999 2:59 PM

To prepare the bracket for mounting, twist off the tabs attached to the center of the bracket and press them securely into the holes on the narrow end of the bracket.

Mounting on a Wall Plate

1.Plug one end of the supplied 7-inch modular cord into the TO TEL. LINE jack.

2.Insert the tabs on the supplied mounting bracket into the slots on the base’s bottom. Then press the bracket down until it snaps into place.

3.Press the AC cord into the top and bottom grooves on the left side of the bracket. Press the modular cord

10

into the center groove on the right side of the bracket, then plug the modular cord into the modular phone jack.

4.Line up the keyhole slots on the bracket with the studs on the wall plate, then slide the base down onto the wall plate until it is secure.

5.Press up on the handset holder to remove it, turn it over so its tabbed edge faces up, then press it back down into its slot on the base.

TAD-1010

900MHz DIGITAL TELEPHONE • ANSWERING SYSTE

MULTI-USER MAIL BOX

DIGITAL ANSWERING SYST EM

MEMO

ANNC.

MEMORY

6.Plug the TAD-1010’s AC cord into a standard AC outlet.