SECURITY CODE
NOTE: This setting may only be made with the base.
You can access the answering system from a tone dialing telephone in another (remote) location. The security code is required for remote access, and it prevents unauthorized access to your answering system. You may only change the security code at the base.
1.Press the flash/program button until SECURITY CODE 1 2 3 shows in the display.
SECURITY CODE 1 2 3
2.Use the
NOTE: If you want to
3.Press flash/program again to store your selection. You will hear a confirmation tone.
RINGER LEVEL
NOTE: This setting may only be made with the base.
1.Press the flash/program button until SET RING LEVEL >1HI 2LO 3OFF shows in the display. The default setting is 1HI.
SET RING LEVEL >1HI 2LO 3OFF
13