MESSAGE INDICATOR
The new message indicator flashes to indicate you have new messages.
SCREENING CALLS AT THE BASE
1. Make sure the phone stops ringing, and the answering system starts.
NOTE: No key press is required; you can hear the caller’s voice through the speaker on the base.
2. Press the speaker button any time to speak to the caller.
TIP: Make sure the volume on the base is set loud enough for you to hear incoming calls.
NOTE: After you press speaker on the base, the answerer stops recording, and the base enters into the talk mode.
MESSAGE PLAYBACK
The new message indicator lets you know when you have new messages. To play messages, press the play/stop button. While a message is playing, you may do the following:
1.Press the play/stop button on the base to stop message playback.
2.Press CID/rev button on the base once to
3.Press CID/rev button twice to review previous messages.
4.Press CID/skip button to skip to the next message.
5.Press the delete button to erase the current message.
ERASING MESSAGES
You may erase messages at the base two ways:
To erase a message while it is playing-
1.Press and release play/stop button.
2.Press CID/rev or CID/skip buttons to play the message you want to erase.
3.Press the delete button on the base. MESSAGE #ERASED shows in the display.
33