HEADSET AND BELT CLIP OPERATION
CONNECTING AN OPTIONAL HEADSET
TO THE HANDSET
For hands free conversation, connect the headset (optional) to the HEADSET jack as shown. The handset receiver and microphone are disabled when the headset is connected.
Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to approximately 2 to 3 inches from your mouth.
•Press the talk/call back button to answer or place a call before using the headset.
CONNECTING THE BELT CLIP
There are two slots, one on each side of the handset.
•Attach the belt clip by inserting the sides of the belt clip into the slots. Snap the ends of the belt clip into place.
DISPLAY MESSAGES
Headset jack Headset plug
Slot for belt clip
The following indicators show the status of a message or of the unit.
ERROR | Caller information has been interrupted |
| during transmission or the phone line is |
| excessively noisy. |
ENTER NAME | Prompt telling you to enter the name in one of |
| the 10 memory locations. |
DELETE ALL? | Prompt asking if you want to erase all |
| Caller ID records. |
DELETE CALL ID? | Prompt asking if you want to erase the current |
| Caller ID record that is shown on the display. |
38