INSTALLING THE PHONE
DESKTOP INSTALLATION
1.Plug the coiled cord into the handset. Plug the other end into the jack on the side of the base.
2.Place the handset in the base.
3.Plug the telephone line cord into the LINE jack on the back of the phone. Plug the other end into a wall jack.
4.Connect the small end of the power supply into the POWER 7.5V AC jack on the back of the answerer. Plug the other end into an AC power outlet. The unit beeps once and is ready for setup or to answer calls with the default greeting and settings.
CAUTION: Only use the ATLINKS USA
3
1
2
4
NOTE: The phone automatically defaults to
NOTE: The unit is properly installed if you pick up the handset and hear the dial tone. Otherwise, recheck all the installation steps.
7