Emerson 708 manual Troubleshooting, Smart Wireless Gateway Network Settings

NOTE

SteamLogic software is provided for viewing steam trap status. Refer to the manual on the CD for more information.

Troubleshooting

If the device is not joined to the network after power up, verify the correct configuration of the Network ID and Join Key, and that Active Advertising has been enabled on the Gateway. The Network ID and Join Key in the device must match the Network ID and Join Key of the Gateway.

The Network ID and Join Key may be obtained from the Gateway on the Setup>Network>Settings page of the web server (see Figure 4-3 on page 4-3). The Network ID and Join Key may be changed in the wireless device by following the Fast Key sequence shown below.

Figure 4-3. Smart Wireless

Gateway Network Settings

4-3