Siemens HWCD8518(3)P/TSDL Selecting VIP Ringer Tones handset Base, Registering the Handset INT

Page 10

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

Selecting VIP Ringer Tones (handset

and base)

Press the Mem/Prog key for 3 seconds

Press the Channel/Select key until “VIP Ring” appears

Press

or

to select the ringer melody. (8 melodies)

Press the Mem/Prog key for confirmation

Press Exit to exit

Note: you must apply for “Show incoming call number” service (or Caller ID Service) to validate this function.

Select Caller Ringer Tones (handset and

base)

Press the Mem/Prog key for 3 seconds

Press the Channel/Select key until “Int Ring” appears

Press

or

to select the melody. (8 melodies)

Press the Mem/Prog key for confirmation

Press Exit to exit

Registering the Handset (INT)

You can register up to four handsets on your base. During the registration, place the handsets close to the base. If you want to know the registration number of each handset, press the “INT” key on the handset, then the register number will be displayed on the handset (HS 1, HS 2, HS 3, or HS 4).

Long press the “INT” key on the base (do not release until registration for all handsets has been completed), until “CodE

____” is displayed on the LCD of the base.

Press the “INT” key on a handset (the handset and the base will respectively display “HS 1” and “CodE ____” register numbers,

and when both the handset and the base ring, you can release the key on the handset, then release the key on the base).

Activating/deactivating Ringer

Handset

Activating ring

Be sure the handset is in standby. Press the Mem/Prog key.

Then press the # key,the handset will sound a confirmation tone.

10

Image 10

Contents Be inspired Expandable cordless phone systemTable of contents Appendix Interface Illustration Preparing to use the phone Installing the phonePack contains Descriptions of displays of the handset Base Descriptions of the function keys Indicators Description of the function keys on the handsetPage Flash timing switch SettingsTone/pulse switch Setting the date and the timeAdding external mark to the incoming calls Handset and base Adjust the LCD light handset and baseAdding IDD code to the incoming calls Handset and base Selecting Ringer Tones handset and baseRegistering the Handset INT Selecting VIP Ringer Tones handset BaseSelect Caller Ringer Tones handset Base Activating/deactivating RingerHandset and base Adjust VolumeBase Adjusting the ringer volume HandsetOutgoing call Last number redialing Answering/Ending a callMaking a Call Basic operationDeleting all outgoing numbers External call and power indicatorsDeleting a single outgoing number Call ending functionTransferring a call Intercom modeBase holding Searching for handset / base and intercomTransferring a call from one handset to another Displaying incoming numbersTransferring a call from the handset to the base Incoming call recordsBrowsing incoming call records Deleting all incoming numbers DirectoryDeleting a single incoming call number Browsing and dial the incoming numbersBrowsing lists in the Directory Setting VIP callsStoring phone numbers Adding dialing pauseDeleting a single number in the Directory Dialing from stored caller-IDDeleting all numbers in the Directory Storing IP numbers Speed dialParts of a long-distance number Location in the Directory PIN lock Setting PIN and Lock CodeIP dialing and dial back Mechanical lock Battery indicationUnlocking Ringing backIndicating information Replacing batteriesSafe use of the batteries CareCalls Hotline Handset Base Top and side Base Bottom and Rear