![](/images/new-backgrounds/1277054/2770547x1.webp)
Gigaset 4010 Comfort, CHIN eng,
Preparing to use the phone
The pack contains:
zBase
zHandset
zMicrophone.
zMicrophone cord (coiled)
zRechargeable batteries
zCharger
zPhone cord
zTwo power supply units with power cord
zOne set of operating instruction
Installing the phone
1.To open the battery compartment, press the battery cover of the handset and slide it down.
2.Insert the battery plug into the socket in the battery compartment and place the batteries into the battery compartment
3.Push up the battery cover
4.Place the handset with batteries into the charger
5.Insert small jack of the power supply unit into the socket on the back of the charger, and then plug the other end into the 220V power outlet.
6.Raise the antenna
7.Insert the jack on the power supply unit into the socket on the back of the base, and then plug the power supply unit into your power outlet. When the LED on the base lights up, the base is powered.
Note: For the initial charge we recommend a continuous, uninterrupted charging period of more than twelve hours before use.
8.Fit the small jack on the phone cord into the socket in the base and fit the other end into phone outlet.
9.If “Ringer Off” is shown on the display, please set the ringer tone to “ON” according tothe descriptions in the “Ring switch” section.
4