Siemens HWCD8518(3)P/TSDL user manual Adding IDD code to the incoming calls Handset and base

Page 9

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

Adding IDD code to the incoming calls

(handset and base)

Press the Mem/Prog key for 3 seconds

Press Channel/Select key till “Lo CodE” appears

Enter one digit of IDD code, which can be deleted by pressing the Flash/Clear key.

Press Mem/Prog key for confirmation Press Exit to exit

Adding external mark to the incoming calls

(handset and base)

Press the Mem/Prog key for 3 seconds

Press the Channel/Select key until “Add” appears

Enter one digit of “9”. (For example, you need to enter “9” for placing outgoing calls. When placing an outgoing call, you must enter “9” before dialing out.)

Press the Mem/Prog key for confirmation Press Exit to exit

Adjust the LCD light (handset and base)

Press the Mem/Prog key for 3 seconds

Press the Channel/Select key till “LCD” appears

Press

or

to adjust the light

Press the Mem/Prog key for confirmation

Press Exit to exit

Selecting Ringer Tones (handset and base)

Press the Mem/Prog key for 3 seconds

Press the Channel/Select key until “Ring” appears

Press

or

to select the ringer melody. (8 melodies)

Press the Mem/Prog key for confirmation

Press Exit to exit

9

Image 9

Contents Expandable cordless phone system Be inspiredTable of contents Appendix Interface Illustration Installing the phone Preparing to use the phonePack contains Descriptions of displays of the handset Base Description of the function keys on the handset Descriptions of the function keys IndicatorsPage Tone/pulse switch SettingsFlash timing switch Setting the date and the timeAdding IDD code to the incoming calls Handset and base Adjust the LCD light handset and baseAdding external mark to the incoming calls Handset and base Selecting Ringer Tones handset and baseSelect Caller Ringer Tones handset Base Selecting VIP Ringer Tones handset BaseRegistering the Handset INT Activating/deactivating RingerBase Adjusting the ringer volume Adjust VolumeHandset and base HandsetMaking a Call Answering/Ending a callOutgoing call Last number redialing Basic operationDeleting a single outgoing number External call and power indicatorsDeleting all outgoing numbers Call ending functionBase holding Intercom modeTransferring a call Searching for handset / base and intercomTransferring a call from the handset to the base Displaying incoming numbersTransferring a call from one handset to another Incoming call recordsBrowsing incoming call records Deleting a single incoming call number DirectoryDeleting all incoming numbers Browsing and dial the incoming numbersStoring phone numbers Setting VIP callsBrowsing lists in the Directory Adding dialing pauseDialing from stored caller-ID Deleting a single number in the DirectoryDeleting all numbers in the Directory Speed dial Storing IP numbersParts of a long-distance number Location in the Directory Setting PIN and Lock Code PIN lockIP dialing and dial back Unlocking Battery indicationMechanical lock Ringing backSafe use of the batteries Replacing batteriesIndicating information CareCalls Hotline Handset Base Top and side Base Bottom and Rear