Siemens HWCD8518(3)P/TSDL Deleting a single outgoing number, Deleting all outgoing numbers

Page 13

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

automatically dialed out. Or

Press the Talk key on the handset or the Hands-free/Dial back key on the base.

Press the Redial key to automatically dial out the last dialed number.

Deleting a single outgoing number

Be sure the handset or the base is in standby.

Press the Outgoing Call (Redial)			key.
Press	or	key to browse	and select the outgoing
records.

Then press the Flash/Clear key on the handset or the base. The screen will display “Delete”.

Press Flash/Clear key again to delete the selected record.

Deleting all outgoing numbers

Be sure the handset or the base is in standby.

Press the Outgoing Call (Redial/Down/Vol Down) key. Then long press the Flash/Clear key on the handset or the base, do not release it until the LCD displays “Delete All”.

Press Flash/Clear key again to delete all the records.

External call and power indicators

When the base is powered, the power indicator will light. When answering or making external calls, the external call indicator will light.

Call ending function

Press the End/Delete/“INT” key on the handset or the End key on the base when finishing a call. Then you can make another call.

Note: Do not use Talk or Hands-free/Dial back key to end a call; otherwise the phone will hang up.

Change channels

In events of interference when using the handset talking, press Channel/Select key to change to another channel.

Temporary tone dialing

This function is designed for pulse dialing users, which can change the pulse dialing to tone dialing temporarily to access the service system that requires tone dialing. For example, after accessing banks or credit card companies, if

13

Image 13

Contents Expandable cordless phone system Be inspiredTable of contents Appendix Interface Illustration Preparing to use the phone Installing the phonePack contains Descriptions of displays of the handset Base Description of the function keys on the handset Descriptions of the function keys IndicatorsPage Tone/pulse switch SettingsFlash timing switch Setting the date and the timeAdding IDD code to the incoming calls Handset and base Adjust the LCD light handset and baseAdding external mark to the incoming calls Handset and base Selecting Ringer Tones handset and base Select Caller Ringer Tones handset Base Selecting VIP Ringer Tones handset Base Registering the Handset INT Activating/deactivating RingerBase Adjusting the ringer volume Adjust VolumeHandset and base HandsetMaking a Call Answering/Ending a callOutgoing call Last number redialing Basic operationDeleting a single outgoing number External call and power indicatorsDeleting all outgoing numbers Call ending functionBase holding Intercom modeTransferring a call Searching for handset / base and intercomTransferring a call from the handset to the base Displaying incoming numbersTransferring a call from one handset to another Incoming call recordsBrowsing incoming call records Deleting a single incoming call number DirectoryDeleting all incoming numbers Browsing and dial the incoming numbersStoring phone numbers Setting VIP callsBrowsing lists in the Directory Adding dialing pauseDeleting a single number in the Directory Dialing from stored caller-IDDeleting all numbers in the Directory Storing IP numbers Speed dialParts of a long-distance number Location in the Directory PIN lock Setting PIN and Lock CodeIP dialing and dial back Unlocking Battery indicationMechanical lock Ringing backSafe use of the batteries Replacing batteriesIndicating information CareCalls Hotline Handset Base Top and side Base Bottom and Rear