![](/images/new-backgrounds/1277054/27705441x1.webp)
Gigaset 4010 Comfort, CHIN eng,
-Press twice the Redial/Pause key.
-Press 1 (for Mandarin)
-Press twice the Redial/Pause key.
-Enter 1373110888889888 (the card number and pin).
-Press #.
-Press the Mem/Prog key to confirm.
Note: Above program is just for reference only, you can set different program by different cards.
IP dialing and dial back
Dialing a
zWhen the handset is in standby, enter the
zWhen you are browsing the incoming calls with the handset, select the number you want to call out, then press IP key. The base will automatically dial with the IP number inserted before the
zPress the Talk key on the handset and then press the IP key. You will hear the dial tone. Then you can enter the
Dialing back the incoming calls:
zIf the
PIN lock
In order to prevent others from making
Setting PIN and Lock Code
For example, if you don’t want any one to call “16897888”, you can set the initial two digits of that number as the lock code and set 0588 as the PIN. Follow the following steps:
Successively press #, #. Enter PIN 0588.
Enter the restricted number 16.
Press the Mem/Prog key to confirm. The handset or the base will make a confirmation tone.
21