Siemens HWCD8518(3)P/TSDL user manual Settings, Tone/pulse switch, Flash timing switch

Page 8

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

Settings

“Tone/pulse” switch

On the rare of the base is a “Tone/Pulse” switch for tone or pulse mode selection.

“Flash timing” switch

On the rare of the base is a “Flash time” switch with three flash

time selections, 90ms, 270ms and 600ms. (For use in China, set

it to be 600ms)

Note: the flash time is effective only by setting it before

connected to power and phone cord.

Setting the date and the time

Press the Volume/Time key for 3 seconds

Press	or	to adjust the Month
Press Volume/Time key to set Date
Press	or	to adjust the Date
Press Volume/Time key to set the Hour
Press	or	to adjust the Hour
Press Volume/Time key to set the Minute
Press	or	to adjust the Minute (or press the Exit key to

exit the setting)

Press Volume/Time key for confirmation and exit

Setting area code (handset and base)

Press and hold the Mem/Prog key for 3 seconds

Enter four digits of area code. If wrong digits are entered, press Flash/Clear key to modify.

Press Mem/Prog key for confirmation

Press Exit key to exit

8

Image 8

Contents Be inspired Expandable cordless phone systemTable of contents Appendix Interface Illustration Pack contains Installing the phonePreparing to use the phone Descriptions of displays of the handset Base Descriptions of the function keys Indicators Description of the function keys on the handsetPage Settings Tone/pulse switchFlash timing switch Setting the date and the timeAdjust the LCD light handset and base Adding IDD code to the incoming calls Handset and baseAdding external mark to the incoming calls Handset and base Selecting Ringer Tones handset and baseSelecting VIP Ringer Tones handset Base Select Caller Ringer Tones handset BaseRegistering the Handset INT Activating/deactivating RingerAdjust Volume Base Adjusting the ringer volumeHandset and base HandsetAnswering/Ending a call Making a CallOutgoing call Last number redialing Basic operationExternal call and power indicators Deleting a single outgoing numberDeleting all outgoing numbers Call ending functionIntercom mode Base holdingTransferring a call Searching for handset / base and intercomDisplaying incoming numbers Transferring a call from the handset to the baseTransferring a call from one handset to another Incoming call recordsBrowsing incoming call records Directory Deleting a single incoming call numberDeleting all incoming numbers Browsing and dial the incoming numbersSetting VIP calls Storing phone numbersBrowsing lists in the Directory Adding dialing pauseDeleting all numbers in the Directory Dialing from stored caller-IDDeleting a single number in the Directory Parts of a long-distance number Location in the Directory Speed dialStoring IP numbers IP dialing and dial back Setting PIN and Lock CodePIN lock Battery indication UnlockingMechanical lock Ringing backReplacing batteries Safe use of the batteriesIndicating information CareCalls Hotline Handset Base Top and side Base Bottom and Rear