Siemens HiPath 4000 operating instructions Appendix, Troubleshooting, Error Possible cause Remedy

Page 65

Appendix

Troubleshooting

Some malfunctions can be resolved without outside intervention. The following table provides a list of such malfunctions.

Error

Possible cause

Remedy

 

 

 

No display.

Mobile telephone not

Press on-hook key un-

 

switched on.

til confirmation tone

 

 

sounds.

 

Battery is empty.

Charge or replace bat-

 

 

tery.

 

 

 

No reaction to key-

Keypad lock activat-

Press hash key until

stroke.

ed.

confirmation tone

 

 

sounds.

 

 

 

De-crescendo tone

An incorrect entry

Repeat key sequence

sequence during in-

was made.

while watching the

put.

 

display; where appli-

 

 

cable, consult the op-

 

 

erating instructions.

 

 

 

The line "Base n" flash-

The mobile telephone

Move into radio

es (n= 1 - 4).

is outside the base ra-

range, i.e. change lo-

 

dio range; radio signal

cation if necessary.

 

too weak.

 

 

Mobile telephone not

Register mobile tele-

 

registered.

phone.

 

Interval between syn-

Switch the mobile tel-

 

chronisation attempts

ephone off and

 

are too long.

switch it back on

 

 

again.

 

 

 

No ringer at the mo-

Ringer is deactivated.

Activate the ringer.

bile telephone.

 

 

 

 

 

Nothing audible dur-

The left side of the

Press the "Go Back"

ing a call.

control key was

display key to re-acti-

 

pressed – the micro-

vate the microphone

 

phone and the receiv-

and the receiver inset.

 

er inset are muted.

 

 

 

 

55

Page 64 Page 66
Image 65
Page 64 Page 66
Contents Operating Instructions Safety notes for the mobile telephone Overview of unit parts Safety notes for using the battery Quick reference guide Page Contents Conducting calls SettingsNumber redial Telephone directory and NET carrier listEnhanced functions Switching functionsIndex Entering textAppendix Operating instructions FeaturesUseful information about the mobile telephone Mobile telephoneRadio range Environmental conditionsDisplaying the radio range Leaving the radio networkKey Name Use Keys, function selection and displayFunction keys Control key NET/Callback keyOperation Function Control Idle status Lists An input field Key MenusOperating status display Display keysIcon Name Use Operating status DisplayCall status User interface of the telephone Call Example for call status display status Eor D Function selectionFunction selection with the on or message status Selection in dial/ringing/call status Inserting the battery Putting the mobile telephone into serviceOpening the battery compartment Inserting the battery Removing the protective coverCharging and using the battery Nickel Metal Hydrid NiMH, 500 mAh Operating and charging timesPermitted batteries Activating/deactivating the mobile telephone Fitting the attachment clipDor E Setting the languageOr G Preparing for registration OverviewSecond telephone Registering a mobile telephone Or G Registering at the system for the first timeRegistering at another system Activating/deactivating the keypad lock Determining direct call numbersPreparing a call Conducting callsInternal/external dialling Conducting a call Cor u Dialling via the telephone directory or NET carrier listAnswering a call Deactivating Speakerphone modeAdvantages Application Activating Setting the volume Muting the microphone Conducting direct callsOverview Number redialManual number redial Automatic redialProcessing the redial list Telephone directory and NET carrier list Telephone directory functions Entering an anniversary Sending and receiving entriesDor o Dialling with the telephone directory or NET carrier listDor R Eor o Settings Default state Finding and setting For G Dor E Setting the sound setting functionsMenus MenuAdvisory tone Meaning Activating/deactivating the warning tone Activating/deactivating the ringerResetting the defaults Setting the auto answer functionActivating/deactivating the vibration alarm Feature ActionSelecting a base Telephone system functions Enhanced functionsSwitches Using the service codesOther functions Voice infoReminder Variable call forwarding Forwarding callsUsing the missed calls list Using the mailboxPerforming the display test Using the message waiting indicationOpening the digital telephone directory Code functions Standard Individual Performing the code functionsMobile telephone functions Room monitor and walkie-talkie modeOperating in walkie-talkie mode Called mobile telephone Calling mobile telephonePerforming the time functions Functions Ringing status Switching functionsFunctions + oCall status Setting up an enquiry during a call Picking up a call Character table Entering textKey utilisation Appendix TroubleshootingError Possible cause Remedy Cleaning the mobile telephone HiPath Cordless Enterprise Technical dataMobile telephone For Gigaset M1 professionalPower supply unit AccessoriesCharging shell HeadsetExtract from original declaration Declaration of conformityAbbreviation Definition List of abbreviationsFunction IndexDo not disturb Keys III Order no. A31003-G2123-B200-1-7619

HiPath 4000 specifications

Siemens HiPath 4000 is a robust and versatile communication platform designed for enterprises seeking to enhance their telephony and collaboration capabilities. Aimed at medium to large organizations, the HiPath 4000 provides a wide array of features that streamline communication processes and increase overall productivity.

One of the standout features of the HiPath 4000 is its modular architecture, allowing businesses to scale their communication systems according to their evolving needs. This flexibility means that organizations can start with a core system and expand as necessary, adding components such as additional lines, advanced telephony functions, and multimedia services. This scalability is crucial for businesses looking to grow without needing a complete overhaul of their existing communication infrastructure.

The HiPath 4000 leverages Voice over IP (VoIP) technology, enabling high-quality voice communication over the internet. This not only reduces costs associated with traditional phone lines but also allows for advanced features such as call forwarding, voicemail-to-email, and conference calling. The integration of VoIP facilitates seamless communication between different locations, making it ideal for geographically dispersed teams.

Another key characteristic of the HiPath 4000 is its support for various endpoint devices, including traditional analog phones, digital handsets, and softphones. This interoperability allows companies to utilize their existing equipment while also adopting newer technologies. As a result, businesses can enhance their communication capabilities without unnecessary replacement costs.

In addition to voice communication, the HiPath 4000 includes unified communications capabilities, which integrate voice, video, and data services. This convergence of various communication methods enhances collaboration among team members, allowing for more dynamic interactions. Features such as instant messaging, video conferencing, and collaborative workspaces are readily available within the system.

Security is a critical aspect of any communication system, and the HiPath 4000 addresses this with advanced encryption and secure access protocols. This focus on security ensures that sensitive company information remains protected, creating a reliable platform for business communication.

In summary, the Siemens HiPath 4000 is a powerful communication solution combining flexibility, scalability, and advanced technologies. With its VoIP capabilities, support for diverse endpoint devices, and unified communications features, it caters to the needs of modern businesses striving for efficiency and innovation in their communication practices.
Top Page Image Contents