![](/images/new-backgrounds/1309021/30902187x1.webp)
14.8.98 | Kap10.fm5 | Gigaset 2010, UEB/engl.: |
Individual settings on the Gigaset 2000S mobile unit
Individual settings on the Gigaset 2000S mobile unit
Setting the ringer volume
B5
oB
You can configure your mobile unit individually. All settings are made directly at the mobile unit. If a number of mobile units are in operation, the mobile unit must be logged on at the base stationn (➔ page 49).
You can set the ringer volume in the handset on 6 levels. These range from level 1 = low to level 6 = high (factory default).
You can also set the volume of the base station ringer (➔ page 32).
Start setting procedure. The selected ringer volume is sounded. The set ringer level is indicated on the display:
:
5 6 | (Example: ringer level 6 is |
P fN | set) |
|
Enter the applicable digit for the required ringer volume (1 to 6) and save.
Setting the ringer tone
B6
oB
You can set the ringer tone on your handset to one of 6 levels. The factory default is level 1.
If several handsets are being operated in one room, it is easier to distinguish their ringers if they are set to different tones.
You can also adjust the base station ringer tone (➔ page 33).
Start setting procedure. The selected ringer tone is sounded. The set tone level is indicated on the display:
:
6 1 | (Example: tone level 1is |
P fN | set) |
|
Enter the applicable digit for the required ringer tone (1 to 6) and save.
34