Siemens Gigaset 2010 Operating more than one handset, Ring priority for incoming calls, FNb

14.8.98 KAP16.FM5 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619

Operating more than one handset

Operating more than one handset

Ring priority for incoming calls

It is possible to set how incoming calls should be signaled when operating several handsets. A distinction is made between:

●Collective call (factory default) – incoming calls are signaled to all registered handsets.

You can exclude individual handsets from the collec- tive call and reintegrate previously excluded hand- sets.

●Ring priority – an incoming external call is first signa- led to a prioritized handset. If this party does not ac- cept the call, the system automatically switches to “collective call” after an adjustable number of rings.

Switching between collective ringing and ring priority

B#1 Start the setting procedure.

Enter the four-digit base code (factory default:”0000“)

o(➔ page 19).

O*23 The current setting is shown on the display

:

n23 1

PfNb

(Example:1 = collective ringing is set)

1B Set collective ringing.

or

2B Set ring priority.

51