
14.8.98 | KAP15.FM5 | Gigaset 2010, UEB/engl.: |
You can operate up to six handsets from the Gigaset 2000 family at a Gigaset 2010 base station.
You can only register handsets from the Gigaset family. It is not possible to register other Giga- set handsets.
The handset supplied with your telephone is already re- gistered at the base station with the internal call number 1 and base number 1.
Each additional handset that you purchase must be regi- stered at the base station. We recommend that when you are registering other handsets at the base station, to keep the base number 1 for this base station.
Registering a Gigaset 2000S handset at a base station
If you want to operate your handset at more than one base station (up to six) (➔ page 51), you must repeat the following procedure at each base station.
The handset must be turned off (➔ page 15)
Prepare the base station
Press the base station paging key until you hear the logon
?tone (after approximately ten seconds).
1or 2,3,4
h
Register the handset
The handset is off. Press number of base station. Press also this key. The handset is on.
Examples: Registering
● Registering at a base station Press 1and h.
Station number
1
fN
●Registering at a 2nd base station Press 2 and h.
49