Siemens Gigaset 2010 operating instructions Either

14.8.98 KAP08.FM5 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619

Internal consultation calls and transferring calls

Transferring calls

When more than one handsets are in operation

	It is possible to transfer an external call to an internal party
	when more than one handset is in operation (➔ page 51).
Io	Press the internal key. Enter the number of the handset
	to which you want to transfer the call (1 to 6). You will
	hear the internal ring tone. The handset is being called.
	The external call is under way.
either
	Wait until the internal party answers and inform him/her
	about the external call you are about to transfer.

aTransfer the external call by pressing the on-hook key.

or

Do not wait until the internal party answers and transfer

athe external call directly by pressing the on-hook key.

Instead of pressing a, you can also replace your handset in the charging unit.

If you have transferred the external call directly and the internal party does not accept the call within 30 seconds, an automatic recall is carried out.

If you have transferred the external call directly and the internal party is busy, an automatic re- call is carried out immediately.

If you accept the recall, you will be reconnected to the external party. A recall is accepted in the same way as all other calls (➔ page 22).

When a telephone system is in operation

If a telephone system is in operation, you can transfer an external call to another internal party. Please check the op- erating instructions for the telephone system.

Setup a consultation call. You will hear the dial tone. The

Rexternal call is held.

Enter the desired extension number. The party in ques-

o

tion is called.

Wait until the party answers and inform him/her about the external call you are about to transfer.

aTransfer the external call by pressing the on-hook key.

31