English
Settings
Recall time
In some advanced PBX systems the recall timing may require adjustment. In normal domestic use this setting should not require changing.
The normal setting is Recall 1.
1.Press Menu.
2.Scroll to Base Settings using v/V. Press OK.
3.Scroll to Recall Mode using v/V. Press OK.
4.Select the required timing (1 = 100ms, 2 = 300ms) v/V. Press OK to confirm.
Base unit PIN code
The PIN code is your personnel
1.Press Menu.
2.Scroll to Base Settings using v/V. Press OK.
3.Scroll to System PIN using v/V. Press OK.
4.Enter the current PIN code (0000 by default). Press OK.
5.Enter your new code. Press OK.
6.Enter your new code again. Press OK to confirm.
24 | www.doro.com |