English
Registration
Registering an additional handset
To enable the use of more than one handset a registration has to be performed. Every new additional handset must be registered in order to use the current base unit, each base unit can handle up to 5 handsets.
On registration the handset is allocated a handset number for use on the current base unit, the handset numbers are
1.Press and hold 4 on the base unit until it beeps twice. Registration mode will remain active for one minute.
2.Press Menu.
3.Scroll to Register using v/V. Press OK.
4.Scroll to Register Handset using v/V. Press OK.
5.Select the base unit you wish to register with (q=engaged). Press OK.
6.Enter the base unit PIN code (0000 by default). Press OK.
7.After a few seconds (no more than 90) the base units ID code will be displayed (for information only). Press OK to confirm.
Base selection
Only used in systems with more than one base unit.
1.Press Menu.
2.Scroll to Register using v/V. Press OK.
3.Scroll to Select Base using v/V. Press OK.
4.Select a base unit using v/V. Press OK to confirm.
De-registering another handset
Any additional handset can easily be
1.Press Menu.
2.Scroll to Register using v/V. Press OK.
3.Scroll to
4.Enter the base unit PIN code (0000 by default).
5.Select the required handset using v/V. Press OK.
6.Press Yes to confirm.
26 | www.doro.com |