Clarity XLC 3.4 manual XLC3.4 Volume & Tone Adjustments, XLC3.4 Caller ID Function

Page 10

XLC3.4 VOLUME & TONE ADJUSTMENTS

XLC3.4 VOLUME & TONE ADJUSTMENTS

Digital Clarity PowerTM Technology

With Digital Clarity Power, high frequency sounds are amplified more than low frequency sounds so words are not just louder, but clearer and easier to understand. It also provides intelligent amplification to make soft sounds audible, while keeping loud sounds bearable.

BOOST On / Off

The BOOST button controls the loudness of the receiver. Once the BOOST button is pressed, an extra level of amplification is added over the entire range of volume control.

VOLUME Control Wheel

During a call, the dial on the side controls the level of volume for handset and speakerphone. The volume dial provides up to 16dB of volume before the BOOST button is activated. Once the BOOST button is pressed, the XLC3.4 will provide up to 50dB of amplification.

Auto Boost

(For turning Auto Boost On or Off, see page 24.) ON – When the Auto Boost is set to ON, the Boost function will be ON every time a call starts. If the phone hangs up, the Boost function will remain ON.

The BOOST button engages the amplifier, controlling the phone’s loudness.When the VOLUME dial is adjusted and the BOOST button is pressed, the phone can reach up to 50dB of gain.

WARNING:VOLUME MAY BE LOUD. PROCEED WITH CARE.

!

BOOST

 

 

 

!

BOOST

 

 

 

!

BOOST

In order to achieve the best audio experience, we recommend the following:

1.Adjust the Volume Control and enable the Boost function (if needed). (Lower the volume level to minimum (VOL 0) before activating the Boost feature.)

2.Press the TONE button to toggle between the available tone settings.

Outgoing Speech Amplification (OSA)

If the level of your voice is too low, while on a call press and hold the BOOST button -- the screen displays “OSA On” on the middle line, alternating with the tone setting.

To disable OSA, press and hold the BOOST button until the display shows the tone setting only.

WARNING:Voice volume level may be loud.We recommend that you turn on this OSA function only if your voice is considered too quiet.

Speakerphone

To switch to speakerphone mode, press the SPK button

.

The display shows the speakerphone mode (see page 18).

E

N G L I S H

OFF – When the Auto Boost is set to OFF, the Boost function will be OFF at the beginning of all calls. Every time a call starts, the user will need to press the BOOST button in order to gain the extra level of amplification.

TONE

Press the TONE button to change the style of amplification. Switching audio tones will change how the telephone conversation sounds to you.

TONE INTERCOM

XLC3.4 CALLER ID FUNCTION

Your XLC3.4 is CID / CWCID compatible (optional service, purchased from your local telephone service provider).

When your phone is ringing, the screen shows the name and number of the person calling you.This information will be stored in the Caller List on your phone.

To access this list, and for further details regarding this function, press UP or DOWN in standby mode, and / or follow the instructions under CALLER LIST (page 20).

NOTE: If you have CID service, the date and time will automatically be set after the first incoming call.

16

17

Image 10
Contents Extra Loud Cordless Speakerphone with Caller ID XLC3.4 Table of Contents XLC3.4 Important Safety Instructions Do not cover the slots and openings on this telephone.ThisXLC3.4 Contents & Parts Checklist XLC3.4 Installation XLC3.4 Wall Mounting Your XLC3.4 Silent Volume UP / DownFind Ringer StyleFlash / Exit TalkDown Ringer on / OFFHandset XLC3.4 Battery Information XLC3.4 Placing & Answering CallsDo not use alkaline batteries Base OptionalXLC3.4 Caller ID Function XLC3.4 Volume & Tone AdjustmentsTone XLC3.4 Telephone Menu XLC3.4 PhonebookXLC3.4 Screen Details HandsetXLC3.4 Menu Caller List XLC3.4 Menu Phonebook ClarityRing Tone XLC3.4 Menu Phonebook XLC3.4 Menu Ringer SetupDelete? Delete All Add Number Keypad Tone Ringer Vol OffPhone Setup Date & Time XLC3.4 Menu Phone SetupCaller List Phonebook Ring Setup XLC3.4 Menu Auto BoostCaller List Phonebook Ring Setup Date & Time Voice Asst Off Any Key Ans Language Dial ModeXLC3.4 Menu Date & Time Then Press Menu Key Registering XLC3.4 Handset Registration XLC3.4 TroubleshootingHandset Needs Registration Hold Base Find Key For 5 Secs Register Auto Talk Voice Asst DeregisterBase Power light blinks green every five seconds Screen displays Battery LowBase Power light blinks green once every second Phone will not hold chargeParty Responsible for Regulatory Compliance Customer-Owned Coin/Credit Card Phones This telephone equipment is hearing aid compatiblePart 15 of FCC Rules Information Plantronics Service Centre XLC3.4 Warranty InformationClarity Service Center Incidental or ConsequentialGuide de l’utilisateur XLC3.4 Table DES Matières Placer ce téléphone sur une surface stable. La chute XLC3.4 Importantes Consignes DE SécuritéConservez CES Instructions Un niveau sonore élevé Jetez les piles usagées selon les instructionsSupport de fixation murale XLC3.4 Contenu & Liste DES PiècesGuide de Montage Mural DE Votre XLC3.4Silent Silencieux Volume UP / Down Haut / BASCharge EN Cours D’UTILISATION / EN Charge Type DE SonnerieBAS VolumeTalk Conversation Boost AmplificateurSonnerie on / OFF Marche / Arrêt XLC3.4 Informations SUR LES PilesTone Tonalité Neckloop PendentifCombiné Base si les piles en optionsont installéesAvertissement LE Volume Peut Être Élevé Remarque Caractéristiques d’éclairage de la touche TalkXLC3.4 Réglage DU Volume & DE LA Tonalité Tone TonalitéXLC3.4 Fonction D’IDENTIFICATION DE L’APPELANT XLC3.4 Détails SUR L’ÉCRANXLC3.4 Répertoire 18004263738 SON 0025 VOL16 1238SUPPRIMER? XLC3.4 Menu DU Téléphone XLC3.4 Menu Liste D’APPELANTSNVX Appel SUPP. Tout SupprimerSUPPRIMER? SUPP. Tout Ajouter XLC3.4 Menu Configuration SonnerieXLC3.4 Menu Répertoire REG. AudioAuto Amplif CONF. TEL DATE/HEURE Melodie 1 Melodie 2 MelodieBips VOL.SONN Auto Amplif Desactiver ActiverCONF. TEL DATE/HEURE XLC3.4 Menu Configuration DU TéléphoneTT Touch RE Langue Mode NUM English Français EspañolXLC3.4 Enregistrement DU Combiné XLC3.4 Menu Date ET HeureAnnuler L’ENREGISTREMENT DU Combiné XLC3.4 Enregistrement DU Combiné XLC3.4 DépannageAssocier Associer Dejumeler ’appareil ne fonctionne pas / pas de tonalitéDifficulté à réaliser ou à recevoir des appels ’écran affiche « Battery Low » Piles faiblesLe téléphone ne maintient pas la charge ’écran de votre combiné affiche « Searching... » RechercheXLC3.4 Caractéristiques Techniques Téléphone Public à Pièces de Monnaies/Carte de Crédit Partie 15 de L’information des Règlements du FCCTel 423-629-3500 or Fax 423-622-7646 or Le parti responsable pour la conformité réglementaireCe sujet devront lui être envoyées directement Guía del usuario Compagnie de téléphonie particulièreInformación Sobre LA Batería Cómo Hacery Contestar Llamadas XLC3.4 Instrucciones Importantes DE Seguridad Guarde Estas InstruccionesSe debe tener cuidado cuando se Soporte para montaje XLC3.4 InstalaciónXLC3.4 Lista DE Verificación DEL Contenido Y LAS Piezas En paredXLC3.4 Montaje Para Pared DEL XLC3.4 Pared 1 ó 2 vueltasVisual Ringer timbre visual Luz Power energíaVolume volumen SUBIR/BAJAR Luz in USE / Charge en uso/recargaNota base sólo se puede Volume Control Wheel rueda de ajuste de volumenRinger Style estilo de timbre Phonebook directorioXLC3.4 Información Sobre LA Bateríaa Base si se colocan las baterías opcionales Advertencia ES Posible QUE EL Volumen Esté Alto NotaAuricular Patrón de luces del botón TalkFunción DE Identificación XLC3.4 DE Llamadas XLC3.4 Ajuste DE Volumen Y TonoTono Microtel XLC3.4 Directorio XLC3.4 Menú DEL TeléfonoXLC3.4 Detalles DE Pantalla Tono 0025 VOL16Menú Lista DE XLC3.4 Menú DirectorioLlamadas Recibidas Tono Tecla VOL Timbr XLC3.4 Menú Configuración DEL TimbreBORRAR? Tono Tecla Desactivar ActivarAutom Asist VOZ BOT Resp XLC3.4 Menú Configuración DEL TeléfonoXLC3.4 Menú Amplificación Automática Auto Amplif Desactivar ActivarContraste Registrar Nivel Activar XLC3.4 Menú Fecha Y HoraAsist VOZ BOT Resp Idioma Fech Y Hora Lista LlamMant Pulsado Botón Find POR 5 SEG XLC3.4 Registro DEL AuricularMicroteléf REGISTRANDO… Registro ExitosoEl teléfono no suena cuando recibe una llamada XLC3.4 Resolución DE ProblemasLa unidad no funciona o no hay tono de marcado El teléfono no cargaXLC3.4 Especificaciones Técnicas Responsable DE Cumplimiento DE LA Normativa DE LAS Partes Conformidad CON XLC3.4 LOS ReglamentosInformación sobre la Parte 15 de los reglamentos de la FCC Cinco Especificación Técnica de Industry CanadaLa división responsable por el cumplimiento normativo XLC3.4 Información Sobre LA Garantía 125

XLC 3.4 specifications

Clarity XLC 3.4 is a cutting-edge software solution designed to enhance business intelligence and analytical capabilities. It targets organizations looking to leverage data effectively for decision-making processes. With its innovative features, Clarity XLC 3.4 stands out in the competitive landscape of analytical tools, providing users with intuitive navigation and extensive functionality.

One of the main features of Clarity XLC 3.4 is its user-friendly interface, which allows users to easily access and analyze data from various sources. This ensures that even those with limited technical expertise can efficiently utilize the software. The dashboard is customizable, enabling users to tailor visualizations and reports to meet specific business needs.

Clarity XLC 3.4 integrates seamlessly with existing enterprise systems, ensuring that data can be pulled from multiple repositories. This capability allows organizations to create comprehensive reports that present a holistic view of their operations. The platform's advanced data processing capabilities include real-time analytics, which empowers businesses to respond promptly to changing conditions.

Another key characteristic of Clarity XLC 3.4 is its robust collaboration tools. These features support team engagement by allowing users to share insights and findings easily. The software promotes a culture of transparency and collaboration, fostering shared understanding across departments and enhancing overall productivity.

In terms of technologies, Clarity XLC 3.4 leverages machine learning algorithms to provide predictive analytics. This allows organizations to forecast trends and make data-driven decisions with higher accuracy. Additionally, the software employs state-of-the-art security protocols to protect sensitive information, ensuring that data integrity and confidentiality are maintained.

The scalability of Clarity XLC 3.4 is another notable feature. As organizations grow, the software can adapt to increasing data volumes and user demands without compromising performance. This flexibility makes Clarity XLC 3.4 an ideal choice for businesses of all sizes, from small startups to large enterprises.

In conclusion, Clarity XLC 3.4 is a powerful analytical tool that combines ease of use with advanced features. Its integration capabilities, collaborative environment, predictive analytics, and scalability make it an essential resource for organizations seeking to improve their data management and business intelligence efforts. As companies continue to navigate an increasingly data-driven world, Clarity XLC 3.4 provides the tools necessary to harness the power of their data effectively.