Clarity XLC 3.4 manual XLC3.4 Important Safety Instructions

Page 3

XLC3.4 IMPORTANT SAFETY

INSTRUCTIONS

XLC3.4 IMPORTANT SAFETY

INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on the telephone.

3.Avoid contact with liquids. Do not locate base unit or handset near water, for example, near a bathtub, wash basin, sink or laundry tub, in a wet basement or near a swimming pool.

4.Avoid using a telephone (other than a cordless type) during a storm.There may be a remote risk of electrical shock from lightning.

5.Do not use the telephone to

report a gas leak in the vicinity of the leak.

6.Unplug this telephone from the wall outlets before cleaning. Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth for cleaning.

7.Place this telephone on a stable surface. Serious damage and/or injury may result if the telephone falls.

8.Do not cover the slots and openings on this telephone.This

telephone should never be placed near or over a radiator or heat register.This telephone should not be placed in a built-in installation unless proper ventilation is provided.

9.Operate this telephone using the electrical voltage as stated on the base unit or the owner’s manual. If you are not sure of the voltage in your home, consult your dealer or local power company.

10.Do not allow anything to rest on the power cord or locate this product in an area where the power cord is likely to be damaged by furniture or foot traffic.

11.Do not overload wall outlets or extension cords as this can increase the risk of fire or electrical shock.

12.Never push any objects through the slots in the telephone.They can touch dangerous voltage points or short out parts that could result in a risk of fire or electrical shock. Never spill liquid of any kind on the telephone.

13.To reduce the risk of electrical shock, do not take this phone apart. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used.

14.Unplug this product from the wall outlet and refer servicing

to the manufacturer under the following conditions: when the power supply cord or plug is frayed or damaged; if liquid has been spilled into the product; if the telephone has been exposed to rain or water; if the telephone has been dropped or the case has been damaged; if the telephone exhibits a distinct change in performance; if the telephone does not operate normally by following the operating instructions.Adjust only those controls that are covered by the operating instructions. Improper adjustment may require extensive work by a qualified technician to restore the telephone to normal operation if the telephone does not operate normally by following the operating instructions.

15.This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your local power company.

16.Do not attempt to open the AC adapter.There are potentially dangerous voltages inside, and there are no serviceable parts.

17.Discontinue use of product

and contact Clarity if the product overheats, has a damaged cord or plug, if the product has been

dropped or damaged or if the product has come into contact with liquids.

18.Use only the AC adapter

provided with this product or a replacement AC adapter provided by Clarity.

19.This phone amplifies sound to loud volumes.To prevent hearing damage, all users of the phone should be informed of the high volume capability of the phone and children should only use the phone when supervised by an adult.

20.Exposure to high volume

sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing.Although there is no single volume setting that is appropriate for everyone, you should always use your telephone with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels.The louder the volume, the less time is required before your hearing could be affected. If you experience hearing discomfort, you should have your hearing checked by a doctor.To protect your hearing, you should:

A)Set the volume control in a low position and gradually increase the volume as needed. Before pressing the

E

N G L I S H

SAVE THESE INSTRUCTIONS

2

SAVE THESE INSTRUCTIONS

3

Image 3 Clarity XLC 3.4 manual XLC3.4 Important Safety Instructions, Do not cover the slots and openings on this telephone.This
Contents Extra Loud Cordless Speakerphone with Caller ID XLC3.4 Table of Contents Do not cover the slots and openings on this telephone.This XLC3.4 Important Safety InstructionsXLC3.4 Contents & Parts Checklist XLC3.4 Installation XLC3.4 Wall Mounting Your XLC3.4 Ringer Style Volume UP / DownFind SilentRinger on / OFF TalkDown Flash / ExitBase Optional XLC3.4 Battery Information XLC3.4 Placing & Answering CallsDo not use alkaline batteries HandsetXLC3.4 Volume & Tone Adjustments XLC3.4 Caller ID FunctionTone Handset XLC3.4 PhonebookXLC3.4 Screen Details XLC3.4 Telephone MenuClarity XLC3.4 Menu Caller List XLC3.4 Menu PhonebookKeypad Tone Ringer Vol Off XLC3.4 Menu Phonebook XLC3.4 Menu Ringer SetupDelete? Delete All Add Number Ring ToneXLC3.4 Menu Auto Boost XLC3.4 Menu Phone SetupCaller List Phonebook Ring Setup Phone Setup Date & TimeVoice Asst Off Any Key Ans Language Dial Mode Caller List Phonebook Ring Setup Date & TimeXLC3.4 Menu Date & Time Register Auto Talk Voice Asst Deregister XLC3.4 Handset Registration XLC3.4 TroubleshootingHandset Needs Registration Hold Base Find Key For 5 Secs Then Press Menu Key RegisteringPhone will not hold charge Screen displays Battery LowBase Power light blinks green once every second Base Power light blinks green every five secondsParty Responsible for Regulatory Compliance This telephone equipment is hearing aid compatible Customer-Owned Coin/Credit Card PhonesPart 15 of FCC Rules Information Incidental or Consequential XLC3.4 Warranty InformationClarity Service Center Plantronics Service CentreGuide de l’utilisateur XLC3.4 Table DES Matières XLC3.4 Importantes Consignes DE Sécurité Placer ce téléphone sur une surface stable. La chuteConservez CES Instructions Jetez les piles usagées selon les instructions Un niveau sonore élevéXLC3.4 Contenu & Liste DES Pièces Support de fixation muraleGuide de Votre XLC3.4 Montage Mural DEType DE Sonnerie Volume UP / Down Haut / BASCharge EN Cours D’UTILISATION / EN Charge Silent SilencieuxBoost Amplificateur VolumeTalk Conversation BASNeckloop Pendentif XLC3.4 Informations SUR LES PilesTone Tonalité Sonnerie on / OFF Marche / ArrêtCaractéristiques d’éclairage de la touche Talk Base si les piles en optionsont installéesAvertissement LE Volume Peut Être Élevé Remarque CombinéTone Tonalité XLC3.4 Réglage DU Volume & DE LA Tonalité18004263738 SON 0025 VOL16 1238 XLC3.4 Détails SUR L’ÉCRANXLC3.4 Répertoire XLC3.4 Fonction D’IDENTIFICATION DE L’APPELANTSUPP. Tout Supprimer XLC3.4 Menu DU Téléphone XLC3.4 Menu Liste D’APPELANTSNVX Appel SUPPRIMER?REG. Audio XLC3.4 Menu Configuration SonnerieXLC3.4 Menu Répertoire SUPPRIMER? SUPP. Tout AjouterAuto Amplif Desactiver Activer Melodie 1 Melodie 2 MelodieBips VOL.SONN Auto Amplif CONF. TEL DATE/HEUREEnglish Français Español XLC3.4 Menu Configuration DU TéléphoneTT Touch RE Langue Mode NUM CONF. TEL DATE/HEUREXLC3.4 Menu Date ET Heure XLC3.4 Enregistrement DU Combiné’appareil ne fonctionne pas / pas de tonalité XLC3.4 Enregistrement DU Combiné XLC3.4 DépannageAssocier Associer Dejumeler Annuler L’ENREGISTREMENT DU Combiné’écran de votre combiné affiche « Searching... » Recherche ’écran affiche « Battery Low » Piles faiblesLe téléphone ne maintient pas la charge Difficulté à réaliser ou à recevoir des appelsXLC3.4 Caractéristiques Techniques Partie 15 de L’information des Règlements du FCC Téléphone Public à Pièces de Monnaies/Carte de CréditLe parti responsable pour la conformité réglementaire Tel 423-629-3500 or Fax 423-622-7646 orCe sujet devront lui être envoyées directement Compagnie de téléphonie particulière Guía del usuarioInformación Sobre LA Batería Cómo Hacery Contestar Llamadas Guarde Estas Instrucciones XLC3.4 Instrucciones Importantes DE SeguridadSe debe tener cuidado cuando se En pared XLC3.4 InstalaciónXLC3.4 Lista DE Verificación DEL Contenido Y LAS Piezas Soporte para montajePared 1 ó 2 vueltas XLC3.4 Montaje Para Pared DEL XLC3.4Luz in USE / Charge en uso/recarga Luz Power energíaVolume volumen SUBIR/BAJAR Visual Ringer timbre visualPhonebook directorio Volume Control Wheel rueda de ajuste de volumenRinger Style estilo de timbre Nota base sólo se puedeXLC3.4 Información Sobre LA Bateríaa Patrón de luces del botón Talk Advertencia ES Posible QUE EL Volumen Esté Alto NotaAuricular Base si se colocan las baterías opcionalesXLC3.4 Ajuste DE Volumen Y Tono Función DE Identificación XLC3.4 DE LlamadasTono Tono 0025 VOL16 XLC3.4 Directorio XLC3.4 Menú DEL TeléfonoXLC3.4 Detalles DE Pantalla MicrotelXLC3.4 Menú Directorio Menú Lista DELlamadas Recibidas Tono Tecla Desactivar Activar XLC3.4 Menú Configuración DEL TimbreBORRAR? Tono Tecla VOL TimbrAuto Amplif Desactivar Activar XLC3.4 Menú Configuración DEL TeléfonoXLC3.4 Menú Amplificación Automática Autom Asist VOZ BOT RespFech Y Hora Lista Llam XLC3.4 Menú Fecha Y HoraAsist VOZ BOT Resp Idioma Contraste Registrar Nivel ActivarREGISTRANDO… Registro Exitoso XLC3.4 Registro DEL AuricularMicroteléf Mant Pulsado Botón Find POR 5 SEGEl teléfono no carga XLC3.4 Resolución DE ProblemasLa unidad no funciona o no hay tono de marcado El teléfono no suena cuando recibe una llamadaXLC3.4 Especificaciones Técnicas Conformidad CON XLC3.4 LOS Reglamentos Responsable DE Cumplimiento DE LA Normativa DE LAS PartesInformación sobre la Parte 15 de los reglamentos de la FCC Especificación Técnica de Industry Canada CincoLa división responsable por el cumplimiento normativo 125 XLC3.4 Información Sobre LA Garantía

XLC 3.4 specifications

Clarity XLC 3.4 is a cutting-edge software solution designed to enhance business intelligence and analytical capabilities. It targets organizations looking to leverage data effectively for decision-making processes. With its innovative features, Clarity XLC 3.4 stands out in the competitive landscape of analytical tools, providing users with intuitive navigation and extensive functionality.

One of the main features of Clarity XLC 3.4 is its user-friendly interface, which allows users to easily access and analyze data from various sources. This ensures that even those with limited technical expertise can efficiently utilize the software. The dashboard is customizable, enabling users to tailor visualizations and reports to meet specific business needs.

Clarity XLC 3.4 integrates seamlessly with existing enterprise systems, ensuring that data can be pulled from multiple repositories. This capability allows organizations to create comprehensive reports that present a holistic view of their operations. The platform's advanced data processing capabilities include real-time analytics, which empowers businesses to respond promptly to changing conditions.

Another key characteristic of Clarity XLC 3.4 is its robust collaboration tools. These features support team engagement by allowing users to share insights and findings easily. The software promotes a culture of transparency and collaboration, fostering shared understanding across departments and enhancing overall productivity.

In terms of technologies, Clarity XLC 3.4 leverages machine learning algorithms to provide predictive analytics. This allows organizations to forecast trends and make data-driven decisions with higher accuracy. Additionally, the software employs state-of-the-art security protocols to protect sensitive information, ensuring that data integrity and confidentiality are maintained.

The scalability of Clarity XLC 3.4 is another notable feature. As organizations grow, the software can adapt to increasing data volumes and user demands without compromising performance. This flexibility makes Clarity XLC 3.4 an ideal choice for businesses of all sizes, from small startups to large enterprises.

In conclusion, Clarity XLC 3.4 is a powerful analytical tool that combines ease of use with advanced features. Its integration capabilities, collaborative environment, predictive analytics, and scalability make it an essential resource for organizations seeking to improve their data management and business intelligence efforts. As companies continue to navigate an increasingly data-driven world, Clarity XLC 3.4 provides the tools necessary to harness the power of their data effectively.