Clarity XLC 3.4 manual XLC3.4 Battery Information XLC3.4 Placing & Answering Calls, Handset, Loud

Page 9

XLC3.4 BATTERY INFORMATION

XLC3.4 PLACING & ANSWERING CALLS

HANDSET

The batteries in the handset must be fully charged for 10 hours before using the telephone for the first time.

Battery life: Talk time is 6.5 hours, while standby is 130 hours without usage. Actual times will vary depending on the amplifier settings used. Replace batteries every two years.

Battery spec (as supplied with your phone): 3xAAA NiMH rechargeable batteries,(1.2V 600mAh NiMH, 60AAAHC, GPI International Ltd.).

To replace batteries, remove the handset battery cover and install new batteries, then close battery cover.

BASE (OPTIONAL)

The base batteries are optional (backup). If you choose to install backup batteries for the base, use rechargeable batteries ONLY. The backup batteries should be AAA, NiMH, rechargeable only, rated 600mAh.They must be fully charged for 10 hours before using the telephone for the first time.

The base backup batteries ensure the functionality of your cordless phone (3-4 hours) in case of a power outage.

When the base unit operates in battery mode (no AC power). the base POWER light will blink once every two seconds.

Open battery compartment door here.

To install batteries in the base:

1.Turn base over and open battery compartment door.

2.Install batteries according to the polarity shown inside the battery compartment.

NOTE:To replace handset batteries or to install base backup batteries, use ONLY standard rechargeable AAA NiMH batteries - 600mAh.

LOW BATTERY INFORMATION

Handset

1.The battery icon on the screen shows no bars; the screen displays “Low Battery”.

2.The handset beeps every two seconds in OFF HOOK mode.

3.The TALK button blinks green twice every 15 seconds in standby mode. It will not flash an alert in OFF HOOK mode.

Base (if optional batteries are installed)

1.The POWER light will blink green once every five seconds.

WARNING: Use rechargeable batteries only.

Do NOT use alkaline batteries!

TO PLACE A CALL:

1.Press TALK, then dial the number using the numeric keypad. See lighting pattern for the TALK button on the bottom of the page.

2.Adjust the volume to the most comfortable level - using the Volume Control and BOOST button (if necessary).

3.Press the TONE button on the side of the handset to adjust the tonality of the incoming voice to the most comfortable level.

WARNING:VOLUME MAY BE

LOUD!

NOTE:

1.If the Voice Assist function is enabled, you will hear the digits of the incoming phone number.

2.Step 1 above can be replaced with one of the following options:

Dial from CID records: Choose a record from your Caller List (see page 17), then press TALK.

Dial from PHONEBOOK: Choose a record from your Phonebook (see page 18), then press TALK.

Pre-dial: before pressing TALK, dial the number you wish to call; digits will display on the screen; press TALK when the number is complete.

Follow with steps 2-3 above to enjoy a clear and comfortable phone conversation.

TO ANSWER A CALL:

1.When phone is ringing, press TALK to answer the call.

2.Adjust the volume and tone of the incoming voice according to your preferences.

3.When finished, press TALK to hang up.

NOTE:

1.For an explanation of the TALK button light, see the bottom of the page.

2.If you have CID service, note the incoming phone number displayed on your screen.

3.If the Voice Assist function is enabled, you will hear the digits of the incoming phone number.

4.At any point during the conversation, press the

speakerphone button to switch to handsfree mode. Use the volume control for adjusting the level of the incoming audio. Switch back to earpiece mode by pressing the speakerphone button again.

Talk Button Lighting Pattern

Green: Phone is in use.

Flashing Green every 15 seconds in standby mode: Low batteries.

E

N G L I S H

14

15

Image 9 Clarity XLC 3.4 XLC3.4 Battery Information XLC3.4 Placing & Answering Calls, Do not use alkaline batteries, Handset, Loud
Contents Extra Loud Cordless Speakerphone with Caller ID XLC3.4 Table of Contents Do not cover the slots and openings on this telephone.This XLC3.4 Important Safety InstructionsXLC3.4 Contents & Parts Checklist XLC3.4 Installation XLC3.4 Wall Mounting Your XLC3.4 Find Volume UP / DownSilent Ringer StyleDown TalkFlash / Exit Ringer on / OFFDo not use alkaline batteries XLC3.4 Battery Information XLC3.4 Placing & Answering CallsHandset Base OptionalXLC3.4 Volume & Tone Adjustments XLC3.4 Caller ID FunctionTone XLC3.4 Screen Details XLC3.4 PhonebookXLC3.4 Telephone Menu HandsetClarity XLC3.4 Menu Caller List XLC3.4 Menu PhonebookDelete? Delete All Add Number XLC3.4 Menu Phonebook XLC3.4 Menu Ringer SetupRing Tone Keypad Tone Ringer Vol OffCaller List Phonebook Ring Setup XLC3.4 Menu Phone SetupPhone Setup Date & Time XLC3.4 Menu Auto BoostVoice Asst Off Any Key Ans Language Dial Mode Caller List Phonebook Ring Setup Date & TimeXLC3.4 Menu Date & Time Handset Needs Registration Hold Base Find Key For 5 Secs XLC3.4 Handset Registration XLC3.4 TroubleshootingThen Press Menu Key Registering Register Auto Talk Voice Asst DeregisterBase Power light blinks green once every second Screen displays Battery LowBase Power light blinks green every five seconds Phone will not hold chargeParty Responsible for Regulatory Compliance This telephone equipment is hearing aid compatible Customer-Owned Coin/Credit Card PhonesPart 15 of FCC Rules Information Clarity Service Center XLC3.4 Warranty InformationPlantronics Service Centre Incidental or ConsequentialGuide de l’utilisateur XLC3.4 Table DES Matières XLC3.4 Importantes Consignes DE Sécurité Placer ce téléphone sur une surface stable. La chuteConservez CES Instructions Jetez les piles usagées selon les instructions Un niveau sonore élevéXLC3.4 Contenu & Liste DES Pièces Support de fixation muraleGuide de Votre XLC3.4 Montage Mural DECharge EN Cours D’UTILISATION / EN Charge Volume UP / Down Haut / BASSilent Silencieux Type DE SonnerieTalk Conversation VolumeBAS Boost AmplificateurTone Tonalité XLC3.4 Informations SUR LES PilesSonnerie on / OFF Marche / Arrêt Neckloop PendentifAvertissement LE Volume Peut Être Élevé Remarque Base si les piles en optionsont installéesCombiné Caractéristiques d’éclairage de la touche TalkTone Tonalité XLC3.4 Réglage DU Volume & DE LA TonalitéXLC3.4 Répertoire XLC3.4 Détails SUR L’ÉCRANXLC3.4 Fonction D’IDENTIFICATION DE L’APPELANT 18004263738 SON 0025 VOL16 1238NVX Appel XLC3.4 Menu DU Téléphone XLC3.4 Menu Liste D’APPELANTSSUPPRIMER? SUPP. Tout SupprimerXLC3.4 Menu Répertoire XLC3.4 Menu Configuration SonnerieSUPPRIMER? SUPP. Tout Ajouter REG. AudioBips VOL.SONN Melodie 1 Melodie 2 MelodieAuto Amplif CONF. TEL DATE/HEURE Auto Amplif Desactiver ActiverTT Touch RE Langue Mode NUM XLC3.4 Menu Configuration DU TéléphoneCONF. TEL DATE/HEURE English Français EspañolXLC3.4 Menu Date ET Heure XLC3.4 Enregistrement DU CombinéAssocier Associer Dejumeler XLC3.4 Enregistrement DU Combiné XLC3.4 DépannageAnnuler L’ENREGISTREMENT DU Combiné ’appareil ne fonctionne pas / pas de tonalitéLe téléphone ne maintient pas la charge ’écran affiche « Battery Low » Piles faiblesDifficulté à réaliser ou à recevoir des appels ’écran de votre combiné affiche « Searching... » RechercheXLC3.4 Caractéristiques Techniques Partie 15 de L’information des Règlements du FCC Téléphone Public à Pièces de Monnaies/Carte de CréditLe parti responsable pour la conformité réglementaire Tel 423-629-3500 or Fax 423-622-7646 orCe sujet devront lui être envoyées directement Compagnie de téléphonie particulière Guía del usuarioInformación Sobre LA Batería Cómo Hacery Contestar Llamadas Guarde Estas Instrucciones XLC3.4 Instrucciones Importantes DE SeguridadSe debe tener cuidado cuando se XLC3.4 Lista DE Verificación DEL Contenido Y LAS Piezas XLC3.4 InstalaciónSoporte para montaje En paredPared 1 ó 2 vueltas XLC3.4 Montaje Para Pared DEL XLC3.4Volume volumen SUBIR/BAJAR Luz Power energíaVisual Ringer timbre visual Luz in USE / Charge en uso/recargaRinger Style estilo de timbre Volume Control Wheel rueda de ajuste de volumenNota base sólo se puede Phonebook directorioXLC3.4 Información Sobre LA Bateríaa Auricular Advertencia ES Posible QUE EL Volumen Esté Alto NotaBase si se colocan las baterías opcionales Patrón de luces del botón TalkXLC3.4 Ajuste DE Volumen Y Tono Función DE Identificación XLC3.4 DE LlamadasTono XLC3.4 Detalles DE Pantalla XLC3.4 Directorio XLC3.4 Menú DEL TeléfonoMicrotel Tono 0025 VOL16XLC3.4 Menú Directorio Menú Lista DELlamadas Recibidas BORRAR? XLC3.4 Menú Configuración DEL TimbreTono Tecla VOL Timbr Tono Tecla Desactivar ActivarXLC3.4 Menú Amplificación Automática XLC3.4 Menú Configuración DEL TeléfonoAutom Asist VOZ BOT Resp Auto Amplif Desactivar ActivarAsist VOZ BOT Resp Idioma XLC3.4 Menú Fecha Y HoraContraste Registrar Nivel Activar Fech Y Hora Lista LlamMicroteléf XLC3.4 Registro DEL AuricularMant Pulsado Botón Find POR 5 SEG REGISTRANDO… Registro ExitosoLa unidad no funciona o no hay tono de marcado XLC3.4 Resolución DE ProblemasEl teléfono no suena cuando recibe una llamada El teléfono no cargaXLC3.4 Especificaciones Técnicas Conformidad CON XLC3.4 LOS Reglamentos Responsable DE Cumplimiento DE LA Normativa DE LAS PartesInformación sobre la Parte 15 de los reglamentos de la FCC Especificación Técnica de Industry Canada CincoLa división responsable por el cumplimiento normativo 125 XLC3.4 Información Sobre LA Garantía

XLC 3.4 specifications

Clarity XLC 3.4 is a cutting-edge software solution designed to enhance business intelligence and analytical capabilities. It targets organizations looking to leverage data effectively for decision-making processes. With its innovative features, Clarity XLC 3.4 stands out in the competitive landscape of analytical tools, providing users with intuitive navigation and extensive functionality.

One of the main features of Clarity XLC 3.4 is its user-friendly interface, which allows users to easily access and analyze data from various sources. This ensures that even those with limited technical expertise can efficiently utilize the software. The dashboard is customizable, enabling users to tailor visualizations and reports to meet specific business needs.

Clarity XLC 3.4 integrates seamlessly with existing enterprise systems, ensuring that data can be pulled from multiple repositories. This capability allows organizations to create comprehensive reports that present a holistic view of their operations. The platform's advanced data processing capabilities include real-time analytics, which empowers businesses to respond promptly to changing conditions.

Another key characteristic of Clarity XLC 3.4 is its robust collaboration tools. These features support team engagement by allowing users to share insights and findings easily. The software promotes a culture of transparency and collaboration, fostering shared understanding across departments and enhancing overall productivity.

In terms of technologies, Clarity XLC 3.4 leverages machine learning algorithms to provide predictive analytics. This allows organizations to forecast trends and make data-driven decisions with higher accuracy. Additionally, the software employs state-of-the-art security protocols to protect sensitive information, ensuring that data integrity and confidentiality are maintained.

The scalability of Clarity XLC 3.4 is another notable feature. As organizations grow, the software can adapt to increasing data volumes and user demands without compromising performance. This flexibility makes Clarity XLC 3.4 an ideal choice for businesses of all sizes, from small startups to large enterprises.

In conclusion, Clarity XLC 3.4 is a powerful analytical tool that combines ease of use with advanced features. Its integration capabilities, collaborative environment, predictive analytics, and scalability make it an essential resource for organizations seeking to improve their data management and business intelligence efforts. As companies continue to navigate an increasingly data-driven world, Clarity XLC 3.4 provides the tools necessary to harness the power of their data effectively.