Synergy 2110 - Edition 5 – 23rd October ’00 (3375)
Setting up
Follow these steps to set up your Synergy 2110 ready for use.
Plan the location of your Synergy 2110
Your Synergy 2110 works by sending and receiving radio signals between the base station and the handset.
The strength of the signal can depend on where you site the base station. Generally, the higher the base station is located the better. An upstairs room is ideal.
Please note
The Synergy 2110 has a range of up to 300 metres outdoors and up to
50 metres indoors. It is possible that the range may be affected by being near water (e.g. large ponds, lakes and the sea) as well as large metal objects (e.g. radiators, metal partition walls and steel girders).
SETTING UP
The following points should be considered:
•It should be within 3 metres of a power socket and phone socket otherwise extension cables will be required.
•Try to avoid locations near metallic obstructions or electrical appliances, such as TV sets, fridges, computers, fluorescent lights, radiators, metal pipes and metal window frames.
•Make sure it is at least 1 metre away from other electrical products to avoid interference.
1Connect the power cable
Plug the power cable into the power socket on your Synergy base station.
Plug the adaptor into the mains power supply and switch on.
The Power/In Use light comes on.
8